What Ball Mounts Work with the Reese Sway-Control Bracket for 2" Ball Mounts RP26003
Question:
Will the Reese 26003 Reese Sway Control Adapter fit on the Rigid Hitch Class III, IV Hitch Ball Mount UB-208-B? The ball mount platform must be 2-1/2 wide and have a 1 ball hole. The adapter is made of 3/8 thick material and mounts under the hitch ball.
asked by: Eric S
Expert Reply:
The Reese Sway-Control Bracket for 2" Ball Mounts part # RP26003 works with any ball mount that has a platform narrower than 2-5/8 and with a 1" diameter hitch ball hole. The adapter is also 3/8" thick so you need to be sure your hitch ball has some additional shank to accommodate this. Unfortunately, we don't carry the ball mount you said you have so I won't be able to obtain these dimensions for you to confirm compatibility, you will need to do this yourself.
If your ball mount is not compatible, I instead recommend just going with the Curt Ball Mount with Sway Control Tab part # D320 since it already have the sway control tab welded on.
Products Referenced in This Question
Curt Ball Mount w/ Sway Control Tab for 2" Hitches - 3/4" Rise, 2" Drop - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Rise - 1 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- CURT
more information >
Product Page this Question was Asked From
Reese Sway-Control Bracket for 1-1/4" Drawbars - Class II
- Accessories and Parts
- Weight Distribution Hitch
- Adapters
- Sway Control Parts
- Brackets
- Reese
more information >
Continue Researching
- Q&A: Recommended Trimax Trailer Wheel Chock and Lock for 175/80R/13 Tires
- Q&A: Parts Needed to Add Brake Controller to 2024 Toyota Sienna Platinum
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Article: 30-Amp and 50-Amp RV Service: What's the Difference?
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Q&A: Difference Between Chrome Plated Steel Hitch Ball and Raw Steel in Terms of Corrosion Resistance
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Outer Flange Measurements for MaxxAir MaxxFan Mini Roof Vent
- Q&A: What is Difference Between Redarc Tow Pro Liberty and Elite
- Article: How to Level a Travel Trailer in 3 Steps
- Q&A: Differences between Class III and Class IV Hitches
- Q&A: How To Mount Weight Distribution Hitch On 2021 Intech Flyer Discover W/ Completely Covered A-Frame
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: The Best Trailer Tongue Locks for Preventing Trailer Theft