Replacing the Drop Leg Spring Loaded Pull Pin on a Bulldog 180 Series Square Jack
Question:
The spring broke in one of my landing gears. Is the spring available and how hard would it be to replace?
asked by: Ray L
Expert Reply:
For a Bulldog 180 series jack you will need replacement drop leg pin # BD500177. It includes the spring, cotter pin, and washer. You should not have to remove the inner drop leg to replace the pin and spring. Start by pulling back on the pin. Then use whatever tool will fit to pull out the cotter key. Then everything should come out.
Then you will put on the spring, washer, and the cotter key goes on last to hold it all in place so put it back in the way that it came out.
The spring alone is not available as a separate part.
Products Referenced in This Question
Replacement Drop-Leg Pin for Bulldog Heavy-Duty Square Jacks - 3/4" Diameter
- Accessories and Parts
- Camper Jacks
- Trailer Jack
- Pins and Clips
- 3/4 Inch Plunger Pin
- Bulldog
more information >
Continue Researching
- Shop: Curt Channel-Mount Coupler - Squeeze Latch - 2-5/16" Ball - 15,000 lbs
- Shop: Replacement Inner Tube with Drop Leg, Foot, and Pull Pin for Curt Heavy Duty Direct Weld Square Jack
- Q&A: Are the Spring Returns of Bulldog Jacks Repairable if the Spring Return Function Stops Working
- Shop: Replacement Square, Direct Weld Jack Inner Tube with Spring-Return Drop Leg
- Shop: Replacement Bearing for etrailer and Ram Square Jacks - 10,000 lbs
- Shop: Square 2-Speed Jack w/ Crank - Drop Leg w/ Spring Return - Sidewind - 25-7/8" Lift - 10K
- Shop: Grease Seal 29031
- Shop: Grease Seal SL226
- Shop: Gooseneck Hitch
- Search Results: tjd~12000~ppn
- Video: Rebuilding the etrailer and Ram Square Jacks
- Search Results: rubber trailer mats
- Search Results: advent air rv air conditioners
- Q&A: Floor Mat Recommendation for Horse Trailer
- Search Results: 8~219~4uc3
- Q&A: Difference Between Pro Series Trailer Jack # PS1400800383 and Bulldog Trailer Jacks
- Search Results: tjd~12000~rsp
- Search Results: 7000 lb axle bearing
- Q&A: Replacement Parts for Ram 12000 Series Jacks
- Q&A: Replacement Screw Kit for Older Ram 10K Jack
- Q&A: 1994 Four Star Horse Trailer Replacement Locking Latch
- Video: Bulldog Powered-Drive Kit Review
- Search Results: dot reflective tape
- Video: TruRyde Trailer Suspension - Leaf Spring Suspension - TREQ1344 Review
- Video: Rebuilding a Bulldog 12000-lb Capacity Jack
- Q&A: Can Electric Trailer Jack Be Powered without Trailer Battery
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Video: Review of Buyers Products Enclosed Trailer Parts - Doors - BP64FR
- Video: Review of Bulldog Replacement Planetary Gearbox Kit For Bulldog Jacks - BD500330
- Video: Powerbuilt Tools - Vehicle Tools - ALL620471 Review