What is the Pin Diameter of 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles - 26" Dacromet
Question:
What is pin diameter on e48sr leaf spring?
asked by: Kevin L
0
Expert Reply:
The 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles part # e48SR is designed for a 9/16" diameter bolt like the Zinc Shackle Bolt with Locknut part # TRFA73Z916DLNZ. If you were to remove the included nylon bushing the hole diameter would be 11/16" diameter. For example, if you wanted to replace the nylon bushing with bronze you'd need the Leaf Spring Bushing part # LC32SV.
expert reply by:
Conner L
0
Products Referenced in This Question
Leaf Spring Bushing - Bronze - 1.74" Long x 0.70" OD x 0.58" ID - Qty 1
- Trailer Suspension Parts
- Bushings
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- 1/2 Inch ID x 3/4 Inch OD
- 1-3/4 Inch Long
- Lippert
more information >
Zinc Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
- Trailer Suspension Parts
- Suspension Bolts
- Boat Trailer
- Snowmobile Trailer
- 9/16 Inch Diameter
- 3 Inch Long
- TruRyde
more information >
Product Page this Question was Asked From
etrailer Rust-Resistant 4-Leaf Double Eye Spring for 4K Trailer Axles - 26" Long - Dacromet
- Trailer Leaf Springs
- Double Eye Springs
- 4000 lbs
- 1-3/4 Inch Wide
- 4 Leaf
- 26 Inch Long
- Dacromet
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Shop: Leaf Spring Bushing - Bronze - 1.74" Long x 0.70" OD x 0.58" ID - Qty 1
- Article: How Much Does a Boat and Trailer Weigh?
- Article: Overview of Lubricating Grease
- Search Results: bushings
- Article: Slipper Spring Trailer Suspension System Review
- Shop: Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Video: Review of Lippert Trailer Leaf Spring Suspension - Bronze Bushing - LC32SV
- Shop: CE Smith U-Bolt Kit for Mounting 2" Square Trailer Axles - 4-1/2" Long U-Bolts - Zinc
- Video: Review of etrailer Straight Tongue Trailer Coupler - Standard Coupler - CT-3001-Z
- Video: etrailer Channel Tongue Trailer Coupler Review
- Shop: Dexter Bronze Bushings - Qty 4
- Shop: Shackle Bolt with Locknut For Double-Eye Springs - 1/2" Diameter - 3" Long
- Shop: 3-Leaf Slipper Spring w/ Radius End for 1,500-lb Trailer Axles - 24-5/8" Long
- Shop: Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-2-G-1K Review
- Video: Bearing Repacking and Grease Seals Installation
- Q&A: What is The Difference Between Having Trailer Axles Above or Below the Leaf Springs
- Search Results: brass bushings
- Video: Review of etrailer Trailer Leaf Spring Suspension - 3 Leaf Slipper Radius End 1500 lb Axle - e99SR
- Video: ABS Fasteners Double-Eye Springs Shackle Bolt Installation
- Search Results: l44643
- Search Results: galvanized leaf springs
- Search Results: leaf springs
- Q&A: Upgraded 26 Inch Leaf Springs For 3,500 lb Axle on Tracker Boat Trailer
- Q&A: Potential Causes for Trailer Hub to Heat Up
- Q&A: Troubleshooting Overheating Hubs on a Trailer With New Bearings and Grease
- Q&A: Finding Correct Replacement Leaf Springs for 4 x 8 Utility Trialer
- Q&A: Replacement Leaf Springs Measuring 20-3/8 or 20-1/2 Inches Long Center Eye to Center Eye
- Q&A: Can a 4-Leaf Trailer Leaf Spring be Used in Place of a 3-Leaf Spring