Whill My OneControl Remote Work With My Lippert Ground Control 3.0 System
Question:
Just got done installing my Lippert Ground Control 3.0 Electric system, etrailer Order Number: 114271985. All seems to be working fine. Im now trying to configure the remote. When hitting Left 5 times then Right 5 times on the LCD panel, nothing happens. The directions I received showed the Retractinch button on the left, but my Panel has the Retractinch button in the middle. I did find a manual that showed the same panel, but there were no directions on the remote. The manual I received initially is dated Rev04.19.18, and the one I downloaded from Lippert is Rev 11.21.22. Are there other directions I need? Can this remote be used with the panel I have? thanks
asked by: Tom G
Expert Reply:
There's a good chance that you received a remote with your system but will not be able to actually use it. Lippert originally had packaged the remote with the certain Lippert Ground Control 3.0 Systems, like the # LC675817 or # LC358590, because it would connect to the control modules that came with an antenna (pictured below).
Due to packaging logistics for a period of time all systems were receiving the remote even though the systems wouldn't be compatible with it. If you do not have the antenna on your control module then you won't be able to sync the OneControl remote included with your kit to the leveling system and will need to just use the standard controller that come with it instead.
Products Referenced in This Question
Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System w Touchpad - 4-Point Set
- Camper Jacks
- Fifth Wheel Camper
- Leveling Jacks
- Stabilizer Jacks
- Steel
- 10001 lbs or More
- Electric Jack
- 36 Inch Lift
- Bolt-On
- 4 Jacks
- Lippert
more information >
Product Page this Question was Asked From
Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System w Touchpad and Remote - 6-Point Set
- Camper Jacks
- Fifth Wheel Camper
- Leveling Jacks
- Stabilizer Jacks
- Steel
- 10001 lbs or More
- Electric Jack
- 36 Inch Lift
- Bolt-On
- 6 Jacks
- Lippert
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Which Lippert Ground Control 3.0 System Is Recommended for a 37' Fifth Wheel
- Q&A: Hole To Hole Dimensions For Replacement I-Beam Jack Bracket # LC349975
- Q&A: Solutions To Add More Clearance For Lippert Ground Control 3.0 Jack Legs
- Q&A: Is The Pad For The Replacement 22-1/2" Legs For The Ground Control 3.0 Welded Or Pinned In Place
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Q&A: Wiring Diagram and Fuse Location for the Lippert Ground Control 3.0 4-Point Leveling System
- Article: How to Measure for Travel Trailer and Fifth Wheel Steps
- Q&A: Wiring Installation for 5th Wheel Landing Gear Switch
- Q&A: Wiring Diagram for 5th Wheel Trailer Landing Gear with Red, Black, White, and Green Wires
- Article: The Best 5th Wheel Hitches
- Article: No Missteps Here: Best Camper and RV Steps (2022)
- Article: Best 2020 Heavy Duty Trucks for Towing a 5th Wheel
- Article: Trailer Maintenance Schedule
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs