Can The UFP Hub/Drums HD-1377-10 Be Resurfaced Or Will They Need Replaced?
Question:
Hello, I have a boat trailer with hydraulic drum brakes and the drum has this number on the outside. HD-1377-10. Wondering what the max inside diameter measurement can be to determine if I need to replace the drum with this item below. Further inspection on the drum is all good, bearings, races, no discoloration. Thank you : Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10inch Diameter - 5 on 4-1/2 Item # 84546UC3
asked by: Steve R
Helpful Expert Reply:
Based on images I could find it would appear the maximum internal diameter is 10.09. This information should be stamped on the drum itself. If you do not have any dimensions stamped on your drum they should not be turned and will just need to be replaced with the Dexter Trailer Hub and Drum Assembly # 84546UC3 that you already found. We also have this hub/drum as an EZ Lube # 84546UC3-EZ if you have the grease zerk on the end of your spindles.
Products Referenced in This Question
Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2
- Shop: Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Q&A: Is Additional Grease Needed to be Pumped into Dexter Trailer Hub that is Pre-Greased
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Search Results: 023~434~00
- Video: Dexter Axle Trailer Brakes - Electric Drum Brakes - 23-468-469 Review
- Video: Dexter Axle Trailer Brakes BP01-110 Review
- Shop: Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Video: Review of etrailer Trailer Hubs and Drums - Hub with Integrated Drum - AKHD-545-35-K
- Search Results: dexter trailer brakes
- Shop: Dexter Trailer Hub and Drum Assembly - 3,500-lb E-Z Lube Axles - 10" - 5 on 4-1/2 - Galvanized
- Shop: Replacement Trailer Brake Magnet Kit for Dexter and Hayes / AL-KO 10" Trailer Brakes
- Video: Review of etrailer Trailer Hubs and Drums - Hub with Integrated Drum - AKHD-545-35-EZ-K
- Video: Review of Dexter Trailer Hubs and Drums - Pre-Greased 3500 LB - 84546UC3-EZ
- Video: etrailer Easy Grease Trailer Hub and Drums Installation - 2020 K-Z Sportsmen Classic Travel Trailer
- Video: Dexter Axle Trailer Brakes - Electric Drum Brakes - 23-26-27 Review
- Search Results: k71~104~00
- Search Results: dexter drum 8 247
- Q&A: Recommended Brake Assemblies and Hubs with Oil Bath For Dexter 8,000 lb Axles
- Q&A: Electric Trailer Brake Kit for 8K Drum Brakes
- Q&A: Are Dexter 8k Brake Assemblies and Al Ko Assemblies Interchangeable
- Q&A: Choosing the Correct Replacement Electric Brakes for 8,000 lb Axle
- Q&A: Is There Difference Between etrailer and Dexter 8k Trailer Brake Assembly Sets
- Q&A: Replacement LED Tail Lights for a Karavan Trailer
- Search Results: akebrk~10
- Search Results: races
- Search Results: 008~247~05
- Article: Testing Trailer Brake Magnets for Proper Function