What to do Since no Hubs Use Bearings 14130 & 09067
Question:
Is there a hub assembly with 5 3/4 bolt pattern with inner bearing 14130 and outer bearing 09067
asked by: Dylan
Expert Reply:
There is not a hub assembly with those bearings, so the only thing you can do here is replace the axle, which I realize isn't ideal, but there are just no hubs that use those bearings. So In order to choose the correct replacement axle for your trailer you will need to know the dimensions of your current axle's hub face to hub face and spring center to spring center as in the diagram I have added; the other thing you need to know is the weight capacity of the axle you need, which should match or exceed the GVWR of your trailer.
For example, the Dexter Trailer Axle with Idler Hubs # 35545I-ST-89 has a 3,500 lb capacity and measures 89 inches from hub face to hub face and 74 inches from spring center to spring center.
I have added a link below to our entire selection of axles for you to filter through one you find the correct capacity and dimensions.
Product Page this Question was Asked From
Dexter Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Spindles
- Idler Hubs
- 3500 lbs
- 5 on 4-1/2 Inch
- 74 Inch Long
- 89 Inch Long
- No Drop or Lift
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Trailer Tire Sizing
- Article: Trailer Wiring Diagrams
- Q&A: Dexter Hub Replacement for Hub Part # K08-219-9B
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: Can Brakes be Added to Second Axle in Tandem Axle Setup
- Q&A: Does It Matter If the Spring Center and Hub Face Is Different When Replacing A Trailer Axle
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Double-Eye Trailer Suspension System Review
- Article: Most Popular Wheel Bearings
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Q&A: 2013 Ford F250 Showing Trailer Wiring Fault Without Trailer Plugged In
- Q&A: How To Wire Up Hopkins Engager Push-To-Test Trailer Breakaway Kit
- Q&A: Wiring Diagram for Trailer Breakaway Kit
- Q&A: Do Trailer Axle Spring Centers Have to Match Perfectly