Locating Replacement Leaf Springs For a Atchison Welding 10 Bale Hay Trailer
Question:
Hi my leaf spring is 28.5 inches long it has 6 plates on it do you have anything like that its for a Atchison welding hay trailer 10 bale
asked by: Angela
Expert Reply:
Based on the information I could for a 10 bale Atchison Welding trailer I only see that it uses 7,000lb axles with slipper springs. The 5-Leaf Slipper Spring w/ Hook End # e74SR is currently the closest spring we have but it no near long enough at 26-5/8" when not compressed. At most it would span 28-1/6" when completely flat. If you have different weight capacity axles and can provide additional information on the springs I may be able to see if we have a different weight rating which may fit your trailer.
Product Page this Question was Asked From
5-Leaf Slipper Spring w/ Hook End for 7,000-lb Trailer Axles - 26-5/8" Long
- Trailer Leaf Springs
- Slipper Springs
- Hook End
- 7000 lbs
- 2 Inch Wide
- 5 Leaf
- 26-5/8 Inch Long
- Painted
- etrailer
more information >
Continue Researching
- Shop: Trailer Hub and Drum Assembly - 7,000-lb Axles - 12" Diameter - 8 on 6-1/2 - Pre-Greased
- Video: Review of Lippert Trailer Hubs and Drums - Hub with Integrated Drum - LC53UD
- Q&A: Hanger Spacing Dimensions for Installing Double-Eye Leaf Springs on a Trailer
- Q&A: Adding Brakes to a Mobile Home Axle
- Q&A: Can Hydraulic Brakes of Demco Tow Dolly be Converted to Electric Brakes
- Q&A: Replacement LED Top Command Clearance Light With SAE-AP2-16 On Lens For 2018 Sunseeker Motorhome
- Article: Trailer Tire Sizing
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Q&A: Installation Information for the Replacement Cables for Enclosed Trailer Ramp Spring # ERS160D96
- Q&A: Protective Case for NOCO Boost X Jump Starter
- Article: How to Store a Travel Trailer/Camper for the Winter
- Article: What To Look For When Buying Ratchet Straps
- Article: Where to Position the Trailer Axle?
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Replacement Hub Recommendation for Dexter Hub 8-250