Replacement Axle Recommendation for 96" Hub Face and 84" Spring Center Dimensions
Question:
I am looking for a replacement gavanized axle, hubs and springs for a double jetski trailer. Hub face is 96 Spring Center is 84 5 X 4.5 Hubs 26 spring hangers. Im having a hardtime finding something that works.
asked by: Jorge
Expert Reply:
Your hub face and spring center dimensions aren't standard which is why you're having a hard time finding replacements. For your application you'll either need to special order an axle with those dimensions from a local RV dealer or shop, or you'll need to swap out your standard suspension system for the Timbren Axle-Less system.
You can get the Timbren kit with an idler hub as part # A20RS545 rated for 2,000 lbs, part # A35RS545 for 3,500 lbs, or with electric brakes as part # A35RS545E for 3,500 lbs. These use rubber AEON springs that work independently of each other for better trailer performance.
Attached is a review and installation video for you to check out.
Products Referenced in This Question
Timbren Axle-Less Trailer Suspension w/ Idler Hubs - Standard Duty - No Drop - 5 on 4-1/2 - 2K
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- Idler Hubs
- 2000 lbs
- 5 on 4-1/2 Inch
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Timbren Axle-Less Trailer Suspension w Idler Hubs - Standard Duty - No Drop - 5 on 4-1/2 - 3,500 lbs
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- Idler Hubs
- 3500 lbs
- 5 on 4-1/2 Inch
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension w Electric Brakes - Standard Duty - No Drop - 5 on 4-1/2 - 3.5K
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- Electric Brakes
- 3500 lbs
- 5 on 4-1/2 Inch
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Continue Researching
- Shop: Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle - 4" Lift - 5 Bolt - 3.5K
- Shop: Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,000 lbs
- Article: Trailer Tire Sizing
- Article: Trailer Wiring Diagrams
- Article: Most Popular Wheel Bearings
- Q&A: Recommended 5 Lug Timbren Axle-Less System for 13" Trailer Tires
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Replacement Axle for 1968 Shasta Camper
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Availability of 3500 lb Timbren Axle Less Kit with 4 inch Lift
- Article: Where to Position the Trailer Axle?
- Q&A: How to Determine Correct 6,000 lb Leaf Springs
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Q&A: Extreme Off-Road Swing-Up Jack for a T@B 400 Tear Drop Trailer
- Q&A: Does Tongue Jack Weight Refer to Tongue Weight or Trailer Weight
- Q&A: How to Determine Weight Capacity of Trailer Axle