How Do You Secure The Pin of the Continuous Hinge # H150 After Cutting Down?

Question

Question:

If I cut down the 6 hinge, how would I secure the pin?

asked by: CC

0

Expert Reply:

When you cut down the Hinge # H150 you will need to peen over the end to ensure the hinge cannot slide out of the hinge. If you do not have enough pin let to peen on the end of the hinge you can weld up the length of the hinge. Do not weld the hinge to the pin but add on the material so you can enlarge the end and prevent it from sliding out of the hinge.

expert reply by: Bud M

0

Answer 1

Yes you can cut the 1-1/2" Wide Continuous Steel Hinge, 6' Long #H150 to length for your smaller applications.

view full answer...

Answer 2

For a trailer tire, the narrowest option rim for any given tire is going to be the best option. For a 205/75-15, the best option would be a 5 inch rim. The reason that narrower is better is because it provides more support for the tire. Since…

view full answer...

Answer 3

A 205/75R15 size trailer tire has an overall diameter of 27-inches when inflated and will fit on four different widths of rim: 5-inch, 5-1/2-inch, 6-inch and 6-1/2-inch. Tire sizes of 13-inches and larger will fit on multiple rim widths. The linked…

view full answer...

Answer 4

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…

view full answer...

Answer 5

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on…

view full answer...

Answer 6

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side.…

view full answer...

Answer 7

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to…

view full answer...

Answer 8

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 9

The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area you need it…

view full answer...

Answer 10

A 16 inch tire will not fit on a 16.5 inch wheel. You would either need to get new 16 inch wheels with the proper bolt pattern to match what the hubs require or to get your existing wheels you would need to go with 16.5 inch tires. You mentioned you…

view full answer...

Answer 11

For all intents and purposes, yes, the Fulton drop leg stabilizer jack SJL80300 is the same as the square leg jack you asked about: - Square Drop Leg Stabilizer Jack - 18" Travel - 2,000 lbs #SJ-R208 Different manufacturers but otherwise they…

view full answer...

Answer 12

The temperature light on your Everchill RV Refrigerator w/ Freezer #324-000119 is likely flashing because of a lack of full power to the fridge. The fridge requires 11 amps. It is likely trying to use more power than what is available which is why…

view full answer...

How Do You Secure The Pin of the Continuous Hinge # H150 After Cutting Down?

Product Page this Question was Asked From

Continue Researching