Correct Tow Bar Wiring For 2022 Jeep Gladiator With LED Lights & ParkSense

Question:

Hi, 2022 Jeep Gladiator with factory LED rear lights and blind spot indicators. Need advice on wire colors and pin numbers if possible for installation of Demco Diode kit for each side. Bought few months ago but been to busy to install. Will be installing Demco Duo also. Thanks

asked by: Rod Z

Expert Reply:

So a couple things here, as by blind spot indicators I believe you are referring to the ParkSense feature on your 2022 Jeep Gladiator. If so, you would not be able to use the Demco # DM9523010-54. The issue is that the brake and running lights will all be the same brightness with standard diodes. To avoid this, you'll need a Smart Diode kit from Roadmaster:

- Roadmaster Smart Diode 7-Wire to 6-Wire Wiring Kit for Variable Voltage LED Tail Lights # RM63MR

The diodes in this kit convert the 12V signal from your RV's wiring to a 9V signal which allows the differentiating brightness needed between the tail and brake lights.

As for the wires or pins, that's not something we have knowledge of on a '22 Gladiator. But you can easily find the right wires by using a circuit tester like # PTW2979.

expert reply by: Kyle S