Correct Rhino-Rack Roof Rack Channel Nuts for Trailer with Rhino-Rack Factory Roof Tracks Installed
Question:
My 2023 No Boundaries trailer comes with Rhino Rack tracks on it. Beth at Rhino Rack says this tracks requires a 24x21mm channel nut which appears to be part number N057-BP. The closest thing I can find on the etrailer site is RRQMFK11, which appears to be correct, but upon searching that part on RhinoRack.com, those channel nuts are actually 30x25x5mm, which is why other customers have had to modify them to make them fit. I would love to buy some channel nuts that fit! Any suggestions? Thanks!
asked by: Steven M
Expert Reply:
I spoke with Rhino-Rack and was able to confirm that both the part # RRQMFK11 (30mmx25mmx5mm) and N057-BP (24mmx21mmx4mm) are compatible with the Rhino Rack Factory Roof Tracks. If you're looking to mount a set of crossbars to these tracks, you'll need a few items which I have attached for you below.
Rhino-Rack Quick Mount Legs part # RRRLT600 (Comes With RRQMFK11)
Rhino-Rack Vortex Aero Crossbars part # RRVA180B-2
If you need a different size crossbar, you can choose this from the list below but keep in mind there are channels under the bars which the feet mount to so there is a minimum and maximum depending on the track width.
Products Referenced in This Question
Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks - Qty 4
- Roof Rack
- Feet
- 4 Pack
- Rhino Rack
more information >
Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 71" Long - Qty 2
- Roof Rack
- Crossbars
- Aero Bars
- 71 Inch Bar Space
- 2 Bars
- Overhang
- Black
- Rhino Rack
more information >
Product Page this Question was Asked From
Quick Mount Nuts for Rhino-Rack RTL600 Legs - Factory Tracks - Qty 4
- Accessories and Parts
- Roof Rack
- Mounting Hardware
- Nuts
- Quick Mount Nuts
- Rhino Rack
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Roof Rack
- Shop: Quick Mount Nuts for Rhino-Rack RTL600 Legs - Factory Tracks - Qty 4
- Video: Review of Rhino Rack Replacement M8 x 16 mm Rectangular Head T-Bolt - RR89HB
- Video: Review of Rhino Rack M8 Channel Nuts - RR59TB
- Shop: Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 71" Long - Qty 2
- Q&A: Are There 1/4 Turn Channel Nuts For The Bottom Channels In The Rhino Rack Pioneer Platform?
- Q&A: Which Channel Nuts Should Be Used With The Rhino-Rack RTC Style Roof Rack Tracks?
- Q&A: Quick Mount Nuts for Rhino Roof Rack Tracks
- Shop: Replacement M8 Channel Nut for Rhino-Rack Accessories - Qty 4
- Shop: Quick Mount Nuts for Rhino-Rack RTL600 Legs - Factory Tracks - Qty 8
- Shop: Replacement M8 x 16 mm Rectangular Head T-Bolt for Rhino-Rack Accessories - Qty 1
- Shop: Replacement M10 Channel Nut for Rhino-Rack Accessories - Qty 4
- Shop: Rhino-Rack RT-Style Roof Rack Tracks - Rivet Mount - 81" Long - Qty 2
- Q&A: Replacement Channel Nuts For Rhino-Rack RTC Roof Rack Tracks
- Shop: Replacement Mirrors
- Video: K Source Replacement Mirrors - Replacement Standard Mirror - KS61051F Review
- Video: Review of Yakima Replacement Anchor Plate "A" For LandingPad 1 - Y8810074
- Video: Review of CIPA Replacement Mirrors - F150 Replacement Passengers Side Mirror - CM47197
- Q&A: What is Thread Size of Replacement Anchor Plate # Y8810074
- Q&A: Material and Thickness of the Replacement C Plates for Yakima Landing Pad 5 Y10156
- Q&A: Are Yakima Anchor Plates compatible With Rhino-Rack RTC-Style Roof Rack Tracks
- Search Results: rhino rack
- Video: Review of Yakima Replacement PlusNut Hardware - Y8810102
- Video: Review of Yakima Ladder Rack Parts - Replacement Hardware for Recovery Tracks - Y83FR
- Search Results: go power 190
- Search Results: foldable trailer
- Search Results: solar panels
- Search Results: go power
John H.
4/10/2024
Hello Conner, I just read this comment by Steven M, followed by your reply. I too am shopping for channel nuts that will fit my 82" Rhino-Rack RTV track (Part #RTV208). I have calipers and I've measured the inside channel width of the track and it is 21mm. There is no way a nut that is 30mmX25mmX5mm (part # RRQMFK11) will fit inside this track without being modified (it is 4mm too wide at its narrowest point). Whoever you spoke with at Rhino-Rack either didn't understand your question or gave you bad information. I felt compelled to relay this information so customers who have the same track as Steven and me don't order the wrong channel nut. Rhino Rack part# N057-BP is in fact the correct part for anyone with an RTV track that has a 21mm wide channel.