Replacement Idler Hubs For 3,500LB Axle To Switch to 5 on 4-1/2 Inch Bolt Pattern
Question:
I would like to replace the spindle and hubs on my current deck over atv trailer axle to a more common lug pattern. The current axle has a 2 lift with 71 spring ctr to ctr. Do you sell spindle/hub sets 5 - 4 1/2 that can be retro fitted to my current axel? Or possibly you have an axle with specs to work. 3500 lbs Overslung 71 ctr to ctr 86 hub face to face Thank you in advance
asked by: Richard P
Expert Reply:
You will most likely be able to use 2 of the Hubs # AKIHUB-545-35-EZ-K on your trailer but you will want to verify your spindle dimensions on your axle. This hub uses a Grease Seal # 58846 (1.719" ID), Inner Bearing # L68149 (1.378" ID) and a Outer Bearing # L44649 (1.063" ID). I have included an image with these measurement points and part numbers on your current parts. If you have a different measurement please let me know what they are and I can determine if we have another hub which will fit.
We currently do not have a replacement axle which matches your specs.
Products Referenced in This Question
Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.719 Inch I.D.
- 2.565 Inch O.D.
- etrailer
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Q&A: Available Trailer Wheel With a 5 on 4-3/4 Inch Bolt Pattern
- Article: Most Popular Wheel Bearings
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Article: Trailer Wiring Diagrams
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Replacement Hub for Tie Down Engineering 11033
- Article: How to Measure a Trailer Axle
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Replacement for Atwood Yoke Style A-Frame Coupler For 2 Inch Hitch Ball
- Article: Trailer Maintenance Schedule
- Q&A: Replacement Zerk Fitting For The UltraFab Weld-On Jumbo Steel Roller # UF48-979012
- Q&A: Replacement Disc Brake Caliper for a Tie Down Engineering 46304 Caliper
- Q&A: How to Determine if Trailer has 84 Spindle to Pick Out Replacement