Can 4-Way With 4 Wires Replace Wishbone 4-Way
Question:
Can a 4 wire 4 way replace a 5 wire 4 way connector? If so, what difference will it make? Thanks.
asked by: Michael W
0
Expert Reply:
Yes, you can replace your wishbone 4-way (which is what the 4-way with five wires is called) with a standard 4-way, the Wesbar # W787264.
You will need to connect # 16-1-1 wiring to the running light wire at the tail light, and then secure it to the trailer frame across the frame to the opposite side tail light to add that running light function.
expert reply by:
Kyle S
0
Products Referenced in This Question
Wesbar 4-Pole Flat Connector w/ Jacketed Cable - Trailer End - 4' Long
- Trailer Wiring
- Trailer Connectors
- Trailer End Connector
- 0 - 5 Feet Long
- Plug and Lead
- 4 Flat
- Wesbar
more information >
Product Page this Question was Asked From
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Parts Needed to Add 7-Way to 2015 Toyota Highlander For Trailer Brake Controller
- Q&A: Best Trailer Hitch Recommendation For a 2024 Toyota Highlander
- Q&A: How to Make an Adapter to Go from Semi Truck 7-Way Round to RV Style 7-Way Blade on Trailer
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: How Many Amps Does the MaxxFan Deluxe Roof Vent w/ 12V Fan and Thermostat Draw?
- Q&A: Parts Needed For Installing 4-Way Flat & 7-Way Blade Connectors On a 2023 Toyota Highlander
- Q&A: Comparing MaxxFan 7500K And 6200K Models. Do I Need A Voltage Regulator?
- Q&A: When Wiring the MaxxFan Deluxe Can I USe 120 Volts or is it Just 12 Volts
- Article: Trailer Lighting Requirements
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Article: Pintle-Hitches
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs