Frame Too Big for Frame Brackets for Curt TruTrack Weight Distribution System - 10"

Question:

I recently purchased the Curt TruTrack Weight Distribution System w/ Sway Control and needed Larger Frame Brackets for my 10in trailer frame. I purchased part # C17516 for 10inch tall frames and I can get the bottom Linch piece that holds the spring tunion bar in the last bottom hole but not the bottom screw that holds the bracket to frame on the second hole because my frame just interferes. Is there a model for 12in frames that I could get that way I can access both bottom holes on my L brakcet for this wd system. Thank you.

asked by: Jeovanni M

Expert Reply:

I do have an option for you but the Curt TruTrack Weight Distribution System part # C17501 is only compatible with trailer frames up to 10" when using the Frame Brackets for Curt TruTrack Weight Distribution System part # C17516.If you have a taller frame or they just won't work for you then you'll be left with attaching the brackets to the frame directly via either drilling or welding. If you opt for the later, make sure this is done by a trained professional.

Unfortunately, the max frame height for a bolt-on weight distribution system is 10".

expert reply by: Conner L