Confirming Fitment Of a 2016 Mazda 6 On a Demco Kar Kaddy Tow Dolly

Question:

The front spoiler on the Mazda 6 has a low clearance does the dolly interfere with the spoiler when hooked up?

asked by: Michael D

Expert Reply:

To ensure you do not damage the front spoiler on your 2016 Mazda 6 there are a few measurements you will need to make. First you will need to measure the ground clearance of your spoiler from the ground. If this is less than 3.5" you will not be able to use the dolly without risking damage to the front of your spoiler. For a measurement taller than 3.5" you will need to multiply this measurement by 4.3 for the Demco Kar Kaddy SS Tow Dolly # DM9713045 or by 4.6 for the Demco Kar Kaddy X Tow Dolly # DM9713093. This number will be the maximum length you can have from where your tire touches the ground to where the lowest point on your spoiler is. For an example if you have 5" of vertical clearance on your spoiler that will give you 21.5" for the SS dolly or 23" for the Kaddy X. Your measurement of the lowest point to where the front tires touch the ground must be less than these measurements to ensure you do not damage the front spoiler while loading and unloading.

This information is also detailed in the instructions for each dolly listed below.

expert reply by: Bud M