Replacement 3,500 lb Axle Recommendation for 70" Spring-Center and 85" Hub-Face Measurements

Question:

Want to know if etrailer has a stock 3500# single axle w/ hubs, 70inch center to center on the springs,and 85inch hub face measurements.

asked by: Sam

Expert Reply:

While we do have some 3,500 lb axles with similar dimensions, none of ours are an exact replacement so a viable solution through us would be a Timbren Axle-Less setup like part # A35RS545 that has idler hubs or part # A35RS545E that comes with a hub and drum system (and includes brakes).

These have a 5 on 4-1/2" bolt pattern and they install directly to the frame of your trailer so you don't have to worry about the axle spacing - just make sure everything is lined up properly when you do the install!

Attached are some videos for you to check out. Please note that if you don't want to go with a Timbren system then you'll need to reach out to your local trailer/RV shop and have them custom order a replacement axle for you that matches your specs.

expert reply by: Jon G