Can Trailer Valet RVR9 Work with Trailer that Has 22 inch and 30 inch Coupler Heights
Question:
I have two trailers one has a top of ball hitch height to the ground of 22inch and the other one is 30. These trailers are 7000 lbs and 3000 lbs respectively. The RVR9 appears to be 18inch tall so either trailer would have to tilt down just to attach the balls. Would this application work? No where on the Trailer Valet site or manual does it mention a minimum or maximum hitch height. Thanks
asked by: Scott
Expert Reply:
Yes, the Trailer Valet RVR9 # TVRVR9 will work fine with the coupler heights you mentioned. Since the speed the trailer will get moved is much lower the fact the trailer will be lower in the front would not be an issue.
Product Page this Question was Asked From
Trailer Valet RVR9 Remote-Controlled Trailer Dolly - Wireless Remote - 9,000 lbs
- Trailer Dolly
- Electric Trailer Dolly
- 9000 lbs Capacity
- 18 Inch Tall
- Aluminum
- 2 Inch Ball
- 2-5/16 Inch Ball
- Silver
- Trailer Valet
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Replacement Hub And Bearing Kit For An AL-KO 8460 Hub
- Q&A: How to Move Motorcycle Trailer After Reaching Camping Destination
- Q&A: Can Trailer Valet XL Push and Pull a Trailer to Move It
- Article: Most Popular Wheel Bearings
- Q&A: Recommended Heavy Duty Air Bags for a 2024 Ram 2500
- Article: Trailer Wiring Diagrams
- Article: Stability Control for Heavy Duty Vehicles
- Article: Determining Trailer Tongue Weight
- Q&A: Recommended Replacement Slide Out Seals For A 2017 Flagstaff Classic Super Lite 8529RLWS
- Article: Trailer Tire Sizing
- Q&A: Should I Get a Proportional or Time-Delayed Brake Controller
- Q&A: What is the Purpose of the Trailer Valet Trailer Wheel Dolly for Tandem Axle Trailers
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: Brake Controller Installation: Starting from Scratch