Can Extang Tonneau Cover for 2013 Ram 2500 with Rambox Fit with DeeZee Chest Toolbox Installed
Question:
Mike I just purchased a 2013 Ram 2500 6ft box 76 in inside front back edge of bed I want to install the dz8556 tool box inside the bed and install the ex46426 tonneau cover over it to protect when not in use. Is it a go? Thanks for your help in advance
asked by: Terry B
Expert Reply:
Measure the inside width of the bed at the front where the box will set. The width of toolbox # DZ8556 is 56 inches. The height when you factor in the lid is just under 17 inches. Measure from the top of the bed corrugations to the top of the bed sides to determine fit.
Some parts of tonneau cover # EX83426 will hang below the tops of the bed on the underside of the cover but they should be off to the sides where the cover attaches to the bed. Given the width at 56 inches for the box this would not pose a problem if the bed width is wide enough. But on Rams that have the Rambox feature the bed is more narrow.
If the box width is tool long then I recommend going with the shorter version, # DZ8546 at 46-1/2 inches and the same 17 inches tall overall.
Products Referenced in This Question
DeeZee Red Label Truck Bed Tool Box - Utility Chest Style - Aluminum - 8 Cu Ft - Silver
- Truck Tool Box
- Chest Tool Box
- 16 Inch Tall
- Aluminum
- Medium Capacity
- 19 Inch Wide
- 46-1/2 Inch Long
- Silver
- DeeZee
more information >
Product Page this Question was Asked From
DeeZee Red Label Truck Bed Tool Box - Utility Chest Style - Aluminum - 9.5 Cu Ft - Silver
- Truck Tool Box
- Chest Tool Box
- 16 Inch Tall
- Aluminum
- Medium Capacity
- 19 Inch Wide
- 56 Inch Long
- Silver
- DeeZee
more information >
Continue Researching
- Q&A: What are the Dimensions of the Yakima EXO Swing Away Rack
- Q&A: How To Secure A Cooler To A Cargo Carrier
- Q&A: Does the Yakima EXO SwingBase Swing Away Hitch Extender Reduce Tongue Weight Capacity?
- Q&A: Why Can't Yakima BackSwing Bike Rack Swing Away Adapter be Used at Rear of Motorhome
- Q&A: Distance From Center of Hitch Pin Out to Rear Edge Spare on Wrangler JL
- Q&A: Swinging Cargo Carrier/Hitch Options to Fit 2-Inch Class III Hitch on 2000 Jeep Grand Cherokee
- Q&A: Hitch Pin Hole to Pin Hole Dimension of Saris Swing Away Hitch Extender # SAR36VR
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Article: How to Tie a Ladder to a Roof Rack
- Article: Best Ladder Racks
- Article: Stability Control for Heavy Duty Vehicles
- Article: How to Measure for Travel Trailer and Fifth Wheel Steps
- Article: 5 Tips to Confidently Choose Your Weight Distribution Hitch
- Article: RV Sway Control, Stabilization, and Suspension Enhancement