Solution for Raising Coyote Inc Boat Trailer Tongue Additional 14 Inches
Question:
Currently my boat is on a Coyote Inc. dual axel trailer in my driveway. Due to the slope of the driveway I really need to raise the trailer tongue up an additional 14 inches to get the boat bow up. Is easy way to do this? Is there an extra long trailer jack available?
asked by: Daniel H
Expert Reply:
The best solution for raising the trailer tongue would be a base pad/jack stand like the # SC86MR. Raising the ground up with something like this is typically better than trying to extend the jack. Two of these stacked together would give you an additional 14" and can hold 3,000 lbs.
However, I'm not entirely sure what your setup will be like on your driveway. sitting these on a steep angle with a trailer jack that has a caster would not work well. Most boat trailer jacks have a similar height and travel, but you may be able to use the Drop Leg Trailer Jack with Footplate # DL97MR.
This jack has 30" of travel with a maximum trailer tongue height of 38". If I had to guess that will be enough compared to your current jack. It has a weight capacity of 2,000 lbs and a zinc-plated steel construction to resist corrosion. It also features a bolt-on installation and is made in the USA.
Products Referenced in This Question
Dutton-Lainson Boat Trailer Tongue Jack - Bolt On - Sidewind - 30" Lift - 2,000 lbs
- Trailer Jack
- Boat Trailer
- Car Hauler
- Enclosed Trailer
- Utility Trailer
- Leveling Jacks
- Tongue Jacks
- Steel
- 1001 - 2000 lbs
- Sidewind Jack
- 30 Inch Lift
- Bolt-On
- With Rectangle Foot
- Dutton-Lainson
more information >
Product Page this Question was Asked From
Stromberg Carlson Base Pad Peak for Tongue and Stabilizer Jacks - 3,500 lbs - Qty 1
- Camper Jacks
- Fifth Wheel Camper
- Pop Up Camper
- RV Motorhome
- Teardrop Camper
- Travel Trailer
- Leveling Blocks
- Plastic
- 3001 - 4000 lbs
- 8 Inch Lift
- 1 Jack
- Stromberg Carlson
more information >
Continue Researching
- Shop: Stromberg Carlson Base Pad Peak for Tongue and Stabilizer Jacks - 3,500 lbs - Qty 1
- Shop: Dutton-Lainson Boat Trailer Tongue Jack - Bolt On - Sidewind - 30" Lift - 2,000 lbs
- Video: Trailer Valet JXS Trailer Jack with Footplate Review
- Shop: Trailer Valet JXS Drill Powered Swivel Trailer Jack w/ Footplate - Sidewind - 14" Lift - 2K
- Shop: Stromberg Carlson Base Pad Extreme for Campers and Trailers - 6,000 lbs - Qty 1
- Shop: Camco Trailer Tongue Jack Stand
- Shop: Trailer Valet JXS Drill Powered Swivel Trailer Jack w/ Footplate - Sidewind - 14" Lift - 5K
- Video: Optronics Trailer Lights - Clearance Lights - MCL13A2B Review
- Video: Optronics Mini LED Side Marker Light Installation
- Video: Dutton-Lainson Drop Leg Trailer Jack with Footplate Review
- Video: Review of Stromberg Carlson Camper Jacks - Base Pad Peak For Scissor And Stabilizer Jack - SC86MR
- Video: Stromberg Carlson Scissor and Stabilizer Jacks Base Pad Peak Review
- Search Results: wheel chock
- Search Results: trailer valet
- Search Results: jack stand
- Search Results: stand
- Q&A: How Many Turns Does it Take to Raise Dutton-Lainson Drop Leg Jack- 2,000 lbs 1 Inch
- Q&A: Does Weld-On Pipe Mount Come With Trailer Valet JXS Trailer Jack TV34FR
- Shop: Optronics LED Mini Clearance or Side Marker Trailer Light - Submersible - 2 Diodes - Amber Lens
- Video: Brophy Cable Camper Jacks Review CJ41
- Search Results: jack block
- Search Results: jack pad
- Search Results: quick connect propane hose
- Q&A: Can Trailer Valet JXS Jack Fit on I-Beam Trailer Frame
- Shop: Vehicle Sway Bars
- Q&A: Can Holes be Drilled to Add A-Frame Jack to Trailer
- Q&A: Bolt On Side Wind Drop Leg Trailer Jack w/ Foot Plate
- Q&A: How To Get More Height From A Stromberg Carlson Tongue Jack
- Q&A: How to Choose the Correct Replacement Trailer Jack With Enough Ground Clearance on Rough Terrain