Will CE Smith Trailer Idler Hub Assembly Fit Timbren Axle-Less Suspension System
Question:
Will these fit on Timbren ARS2500HDSO2?
asked by: Derrick L
Expert Reply:
The CE Smith Trailer Idler Hub Assembly # CE13611 will fit any of the Timbren Axle-Less systems as long as they use the same # L68149 inner and # L44649 outer bearing combination. This combination is typically found on 3,500 lb axles.
This means they will fit the # ASR1THDS02 you were looking at, but not the # ASR35HDS02 or the # TASR5200S03. All of the 2,200 lb systems use this bearing combination, and any of the 3,500 lb systems that are not the heavy-duty model. I have attached a link to all of our Timbren Axle-Less systems below for your reference.
Products Referenced in This Question
Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle w/ No Drop - 4 Bolt Flange - 2.2K
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- No Hubs
- 2200 lbs
- Spindles Only
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle - 4" Lift - 5 Bolt - 3.5K
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- No Hubs
- 3500 lbs
- Spindles Only
- Universal Fit
- Lift - 4 Inch
- Timbren
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Timbren Axle-Less Trailer Suspension - Standard Duty - 4" Lift - 5 Bolt Flange - 5,200 lbs
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- 5200 lbs
- Spindles Only
- Universal Fit
- Lift - 4 Inch
- Timbren
more information >
Product Page this Question was Asked From
CE Smith Trailer Idler Hub Assembly for 3,500-lb Axles - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- CE Smith
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: CE Smith Trailer Idler Hub Assembly for 3,500-lb Axles - 6 on 5-1/2 - Pre-Greased
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Q&A: 5x4.5 to 6x5.5 Hub Conversion on Trailer
- Shop: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double-Eye Springs
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4" Long Shackle Straps
- Q&A: Recommended E-Z Lube Hub and Rotor Assembly for 6K Axles
- Q&A: Will The In Bed 7-Way Fit On a 2023 Ford F-150 With In Bed Power Outlet?
- Q&A: Recommended Replacement Brakes for TDE 46304 Brakes
- Article: Trailer Tire Sizing
- Q&A: Bearings For Older Trailer Hub 22834
- Q&A: Replacement Trailer Bearing for L44640
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Most Popular Wheel Bearings
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Printable Trailer Bolt Hole Pattern Template
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer