What Wire Goes Where When Installing the Solenoid From the Replacement Master Cylinder w/ Lockout
Question:
I have a da91 that I just received from your company and the reverse solenoid has 2 wires and my existing one had only 1. do I just hook up 1 to ground and the other to harness and if so which one is positive and which one is ground?
asked by: Tom S
Helpful Expert Reply:
One of the wires from the solenoid on the Replacement Master Cylinder w/ Bypass Electric Lockout for Demco Actuators # DM5918 will be your power wire that goes to the reverse circuit and the second wire is a ground wire that will go to a good grounding source. It does not matter which wire is used for which.
Product Page this Question was Asked From
Replacement Master Cylinder w/ Bypass Electric Lockout for Demco Actuators - Disc Brakes
- Accessories and Parts
- Brake Actuator
- Disc Brakes
- Master Cylinder
- Demco
more information >
Continue Researching
- Q&A: Replacement for Demco Master Cylinder 05680-C for Drum Brakes
- Q&A: 05680-C Master Cylinder Replacement for Trailer Recommendation
- Article: Trailer Wiring Diagrams
- Q&A: LED Replacements For # 93 Incandescent Bulbs
- Article: What is Boondocking
- Article: Cleaning Your RV Black Water Tank in 4 Easy Steps
- Article: Brake Controller Installation: Starting from Scratch
- Q&A: Parts Needed to Install Brake Controller on 2012 Chrysler Town and Country
- Article: How to Charge a Dump Trailer Battery
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Equal-I-Zer Weight Distribution is Too Stiff; Can Lighter Bars be Used in the Same Head
- Q&A: Can Battery Warmer Be Used on Lithium Ion Battery
- Q&A: Replacement Grease Seal for a 168255TC Rubber Coated Seal
- Article: Trailer Tester Battery Replacement for Part Number 8010