Correct Air Lift Ride Control Air Helper Springs for a 2018 GMC Canyon

Question

Question:

I see that you sell a kit for the 2WD and one for the 4WD. The part number is the same, so what is the difference in the kits??

asked by: Keith W

1

Helpful Expert Reply:

The Air Lift Ride Control Air Helper Springs part # AL59533 are a fit for a 2018 GMC Canyon both 2WD and 4WD models, there are no differences. Please note these only fit so long as your '18 Canyon does NOT have a diesel engine.

expert reply by: Conner L

1

Answer 1

The only set of airbag that are available for a 2019 Chevrolet Colorado with the diesel engine at this time are the Firestone Sport-Rite Air Helper Springs part #F2587. This system is a direct fit so no drilling is required. They have a 3,000 lb…

view full answer...

Answer 2

I do have a solution for you, but when I spoke with my contact at Air Lift she said that the frame on your 2017 GMC Canyon with the diesel engine is slightly different. Because of this the Ride Control #AL59533 you referenced doesn't line…

view full answer...

Answer 3

The Replacement Carriage Bolt #F2135821149 referenced in your question will indeed work with your existing Firestone Sport-Rite Air Helper Springs #F2587 to provide you with a longer bolt to accommodate the extra leaf on your new leaf pack. The…

view full answer...

Answer 4

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 5

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 6

The correct replacement master cylinder kit we have for your Demco setup is the part #DM5918 which comes with the lock out replacement.

view full answer...

Answer 7

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 8

Brake systems are not dependent on the hub bolt pattern. So you can use the Electric Trailer Brake Kit #AKEBRK-7-SA for 12 inch hub/drums or #AKEBRK-35-SA for 10 inch hub/drums. Then use #10-1-1 wire sold by the foot for your brake magnet wiring.…

view full answer...

Answer 9

You'd need a new panel like the Progressive Dynamics Mighty Mini part #PD4045KA which is the most similar to your Parallax 7345 except is Lithium battery compatible. There isn't a center section replacement available for what you have that…

view full answer...

Answer 10

Basically, a free backing brake assembly like #T4423400, will have one shoe that is shorter than the other and the bracket will be a different shape. On a regular assembly, the shoes will by mirror images of each other. Also, on a free backing…

view full answer...

Answer 11

As it seems you already know, when installing a trailer brake controller on your 2007 GMC Yukon you will need to locate the two wires under the hood that need to be connected to fully activate the vehicle's tow package. One is the power wire to…

view full answer...

Answer 12

A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…

view full answer...

Correct Air Lift Ride Control Air Helper Springs for a 2018 GMC Canyon

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching