Replacement Bearings for Spindle with 0.750 and 1.378 Bearing Measurements

Question:

need complete hub kit inner bearing id is 1-3/8inch and outer is 3/4

asked by: CODY G

Expert Reply:

To replace you're bearings you need the bearing # LM11949 which has an inner diameter of 0.750" and then the bearing # L68149 which has an inner diameter of 1.378". To determine the grease seal I'll need you to measure the inner and outer diameter of your current grease seal.

If you're needing to replace some hubs then you might have a hard time finding what you're needing. That bearing combination is not common and current hubs don't use them. You might be able to find what you're looking for but in these kind of scenarios where the standard replacement is outdated I usually recommend looking into replacing the entire axle. This way you know you can get what you need from now on. If you decide to go this route please let me know and I'll help you figure out what you need!

expert reply by: Jon G