Bearing Buddy For A Straight Spindle With An Outer Bearing # LM67048
Question:
Hi. I’m looking for the correct bearing buddy size for my trailer. It’s a straight spindle with LM67048 bearings.
asked by: Ricky M
Expert Reply:
When doing some research with the Outer Bearing # LM67048 you provided, the flange diameter of your hub should be 2.44 inches. The Bearing Buddy Bearing Protectors # BB2441SS fits with a 2.441 inch hub bore. The bearing buddy is constructed of stainless steel. It maintains slight, controlled pressure (3 psi) with spring-loaded piston, which prevents water from entering the hub.
This bearing buddy works with the Outer Bearing # LM67048 that your provided. I attached a review video link below.
Products Referenced in This Question
Bearing Buddy Bearing Protectors - Model 2441SS - Stainless Steel (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 2.441 Inch
- Bearing Buddy
more information >
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - LM67048
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing LM67048
- Race LM67010
- 5000 lbs Axle
- 6000 lbs Axle
- etrailer
more information >
Continue Researching
- Shop: Bearing Buddy Bearing Protectors - Model 2441SS - Stainless Steel (Pair)
- Search Results: 2328
- Shop: CE Smith Bearing Protectors w/ Covers for 2.328" Hub Bore - Chrome - 1 Pair
- Shop: Replacement Trailer Hub Bearing - LM67048
- Shop: Bearing Buddy Bearing Protectors - Model 2240 - Chrome Plated (Pair)
- Article: Most Popular Wheel Bearings
- Article: Trailer Wiring Diagrams
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Q&A: Bearings and Seal Used for AL-KO 7290 Trailer Hubs for #99 Spindles
- Q&A: Looking for Replacement Trailer Lamp Lens # 1A-S-20
- Q&A: Replacement Brake Shoes for 10 x 1-3/4-inch Brakes on 22-Foot Travel Trailer with 3500-lb Axles
- Article: Replacing RV Awning Fabric: Your Step-by-Step DIY Guide
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Bearing Kit for Lippert 4,400 lb Trailer Axle
- Q&A: Replacement Studs for RVD-H-865 7k Hub/Drum
- Q&A: Replacement Hub Needed for Lippert 122093 Hub on 5,200 lbs Axle
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide