Where Does the Reese Universal 5th Wheel Installation Kit Install on a 2007 Ford F-250

Question:

I have an 07 Ford F250, I purchased a hitch, The part number for the kit is RP30035, I have an 8 ft bed what are the measurements to install this,

asked by: Jerry A

Helpful Expert Reply:

The first thing you need to know is that you will need new hardware to install the kit because the hardware is designed for one-time installation and should not be re-torqued. So for the correct hardware kit for universal installation kit # RP30035 you will need # RP58430.

For a 2007 Ford F-250 with an 8 foot bed, measure from the rear edge of the bed (not the tailgate) forward 32-1/2 inches. This is where the back edge of the rear rail will be. Then you will use the 5th wheel hitch to find the placement of the front rail. I have included a link to the installation instructions for you. Go to sheet 11 of 21 for your truck. I have also included a link to a video showing a typical installation for you.

expert reply by: Michael H