Axle Placement When Building A Three Axle Trailer
Question:
when I build this trailer where do I place the axles on a three axle trailer.
asked by: Daryl
Helpful Expert Reply:
In order to calculate where the axles would go on your trailer, there are several things that need to be taken into consideration. You will have to mock up the trailer with the suspension and axles to get the weights needed to determine where the axles need to be positioned. I have attached a photo that shows you the formulas needed to determine the correct position of the axles.
To help you determine what components you will need, I have linked you to a help article for trailer suspension, and the parts needed. I have also attached a photo that has a diagram of spring hanger dimensions. It lists the hanger kits based on the springs you choose to use.
I would recommend slipper springs because they can handle heavier weight than double eye springs, and also have fewer moving parts.
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 6,000-lb Axles - 6 on 5-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- 25580
- 15123
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- 18 Inch Wheel
- 18-1/2 Inch Wheel
- Dexter
more information >
Continue Researching
- Shop: Replacement Head Assembly for B&W Patriot 5th Wheel Trailer Hitch - 18,000 lbs
- Shop: Curved Equalizer for 1-3/4" Wide Double-Eye Springs - 7-3/4" Long - 3/4" Center Hole
- Shop: Easy Grease Trailer Hub and Drum Assembly for 5.2K - 7K Axles - 12" - 8 on 6.5 - Pre-Greased
- Shop: Equalizer for 1-3/4" Wide Double-Eye Springs - 6-3/4" Long - 9/16" Center Hole
- Q&A: Direction of Equalizer # TREQ105 When Installed on Triple Axle Trailer
- Search Results: 10 ply trailer tires
- Q&A: Can a Curved Equalizer be Replaced with a Straight Equalizer
- Q&A: Why Do Trailer Suspension Equalizers Come in Different Shapes and Sizes
- Q&A: Recommended Hanger Spacing for Triple Axle Trailer
- Search Results: battery box
- Q&A: 7-Way Trailer Wiring Recommendation for Use in Cold Weather
- Search Results: electric trailer jacks
- Search Results: square jack
- Shop: Electric Jack w/ Footplate - Drop Leg - A-Frame - 25-1/8" Lift - 3,500 lbs - White
- Shop: 7-Way Molded Trailer End with 6' Cable - HD Blue Insulated
- Shop: 7-Way Molded Trailer Wire Connector - 3' Long
- Search Results: 7k brake drum
- Search Results: 2 speed jack
- Search Results: 023~459~00
- Q&A: Troubleshooting Triple Axle Trailer with Rear Axle Off The Ground
- Q&A: Triple Axle Location Recommendation for Building Trailer
- Video: etrailer Trailer Suspension - Leaf Spring Suspension - APTT5 Review
- Article: Double-Eye Trailer Suspension System Review
- Article: Where to Position the Trailer Axle?