How Do I Know If I Have a #84 Spindle?
Question:
how can i tell if my spindle is a number 84
asked by: Brad B
Expert Reply:
Great question!
The best way is to pull the hub and either check the bearing and seal numbers or measure the spindle itself where the bearings and seal ride (see attached photo). These specs apply to pretty much every 3,500 lb axle made since the 90's so if your axle is rated for 3,500 lbs odds are you have the #84 spindle but you can use the specs in the photo to double check on your end.
If you do have the #84 spindle then the Easy Grease Trailer Idler Hub Assembly # AKIHUB-545-35-EZ-K will work but if you find different bearing/seal numbers or measurements just let me know what you have and I'd be more than happy to further assist!
Attached is an installation video you can check out. In this video we remove the old hub and install the new one so you can have step by step help on both side of the installation.
Product Page this Question was Asked From
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Q&A: Replacement Zerk Fitting For The UltraFab Weld-On Jumbo Steel Roller # UF48-979012
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Q&A: Replacement Hub for Tie Down Engineering 11033
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Trailer Wiring Diagrams
- Article: How to Measure a Trailer Axle
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Q&A: Replacement Hub Assembly for T.D.E. 11033
- Q&A: Availability Of TLC65 Trimax Trailer Wheel Chock and Lock With A23456 Keys
- Article: Trailer Maintenance Schedule
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Correct Replacement for 10 Inch x 1-3/4 Inch Braking Assemblies
- Q&A: Can I Swap Out 4-Lug Hubs For 5-Lug Hubs On A Little Dude Boat Trailer?