Locating the Correct Grease Seal Size for a Boat Trailer
Question:
I am having A real problem with my boat trailer My grease seal size is 1.50 ID 2.50 OD I need your help trying to find this grease seal.You have the bearings and races I need Thank You
asked by: Ray V
Expert Reply:
After doing some research I was not able to locate a grease seal with a 1.500 inch inner diameter and a 2.500 inch outer diameter. I spoke with my grease seal supplier and they do not carry a grease seal with those dimensions either.
If you are measuring the grease seal itself, I would recommend measuring the hub and spindle. Sometimes the rubber of the grease seal and the outer ring can become deformed or damaged. I also recommend using a precise measuring tool such as a dial caliper. I have attached a photo showing where to take the measurements on the hub and spindle.
Product Page this Question was Asked From
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Single Lip
- 1.500 Inch I.D.
- 2.332 Inch O.D.
- Redline
more information >
Continue Researching
- Q&A: Can RV Covers Be Left On Travel Trailer While Driving
- Q&A: Replacement Kwikee Electric Steps for a 2005 Jayco Greyhawk 31SS
- Q&A: Do the Colors of Trailer Brake Magnets Mean Anything
- Q&A: Why Would New Trailer Brakes Feel Weak After Axle Replace
- Q&A: Determining Axle Length for Home-made 4 x 8 Trailer Using Square Stub Spindles
- Q&A: Replacement Trailer Axle Recommendation for a 4 by 8 Utility Trailer
- Q&A: Recommended Square Bulldog Jack with 5,000 lb Capacity
- Article: My Trailer Hitch Doesn't Fit
- Article: How to Measure for Trailer Hitch Drop
- Article: How to Bleed Your Trailer Surge Brakes
- Article: How to Choose the Right Trailer Hitch Class
- Article: Trailer Wiring Diagrams
- Article: How to Measure a Trailer Axle
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub