Recommended Replacement Straight Tongue Coupler For An Atwood Channel Tongue Coupler 80051
Question:
Do you know a replacement part for an Atwood coupler 80051/80055 would be?
asked by: Sandra E
0
Expert Reply:
While we do not have an exact replacement for your Atwood Channel Tongue Trailer Coupler - Yoke Latch AT80051, which is no longer available, I do have an alternative.
Take a look at the:
-Trailer Coupler 2" Ball 3" Channel Tongue # DL13800.
This coupler, like your AT80051, will fit a 3" channel, will work with 2" hitch balls, and has a maximum capacity of 3,500-lbs.
Additionally, the bolt holes on # DL13800 are 3" on center, and has an overall length of 10-1/2" long, so it'll be a bit shorter than your AT80051.
expert reply by:
Bryce D
0
Product Page this Question was Asked From
Trailer Coupler 2" Ball 3" Channel Tongue (3,500 lbs.) by Dutton-Lainson
- Straight Tongue Trailer Coupler
- Standard Coupler
- 2 Inch Ball Coupler
- Bolt-On
- Weld-On
- 3500 lbs GTW
- 3 Inch Channel
- Trigger Latch
- Dutton-Lainson
more information >
Continue Researching
- Shop: Rear View Safety Backup Camera System
- Shop: Optronics Streamline LED Trailer Tail Light - Submersible - 3 Function - 11 Diodes - Red Lens
- Shop: Trailer Coupler 2" Ball 3" Channel Tongue (3,500 lbs.) by Dutton-Lainson
- Search Results: stl79rb
- Shop: Optronics ThinLine LED Trailer Tail LIght - Stop, Turn, Tail - Submersible - 11 Diodes - Clear Lens
- Shop: Hot-Line LED Utility Light Bar - Submersible - 13 Diodes - Clear Lens
- Shop: Hot Dot LED Trailer Clearance and Side Marker Light - 2 Diodes - Amber Lens
- Search Results: optronics trailer lights
- Search Results: 2 inch coupler
- Search Results: p2p305
- Search Results: sierra trailer lights
- Search Results: trailer fender light
- Search Results: trailer fender lights
- Q&A: Trailer Capacity for Axles with 5 Lugs
- Shop: Square Direct Weld Jack w/ Footplate - Drop Leg - Topwind - 29-1/4" Lift - 3,000 lbs
- Q&A: Length of Warranty for Advent Air Replacement Rooftop RV Air Conditioner
- Q&A: Replacement Coupler Solution for Atwood Yoke Style Coupler with 15775 Part Number
- Q&A: Is One Demco 2 Inch Ball Channel Coupler Safer Than Another
- Q&A: Dimensions Of Coupler Ball Release Lever On Demco Channel Coupler EZ Latch
- Q&A: Can Yoke-Style Trailer Coupler be Adjusted for Better Connection to Hitch Ball
- Q&A: Replacement for Atwood Yoke Style A-Frame Coupler For 2 Inch Hitch Ball