6 Lug Trailer Hub with for Spindle Bearing Dimensions of 1.75 and 1.25 inch
Question:
I have a trailer with a 14.5 tire and it’s on a trailer house still wheel. It has a 1.78 inner bearing and a 1.25 putter bearing is there a conversion to a 6 x5.5 wheel
asked by: Evan V
0
Expert Reply:
Your dimensions are VERY close to what the standard 5,200 through 6,000 lb trailer axle bearings are designed for like what the Easy Grease Trailer Hub and Drum part # AKHD-655-6-EZ-K uses. This has bearing dimensions of 1.75 and and 1.25 inch so it's very close. I would recommend remeasuring what you have to see if maybe the inner bearing is 1.75 inch. I would be shocked if it wasn't.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- 25580
- 15123
- For 5200 lbs Axles
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Continue Researching
- Q&A: Replacement Recommendation for Dexter Axle 8-201 Hub Assembly on Older Horse Trailer
- Search Results: dexter
- Shop: Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Shop: etrailer Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 5,200 lbs to 7,000 lbs
- Shop: Dexter Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 6 on 5-1/2 - Pre Greased
- Shop: Dexter Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 6,000 lbs
- Q&A: Recommended Nev-R-Adjust Brakes for a 6k Dexter Axle
- Q&A: Trailer Hub/Drum to Go with Brake Assembly Set 23-112-113
- Q&A: Should There Be Any Play After Installing An Easy Grease Trailer Hub and Drum Assembly
- Shop: Trailer Wheel Center Cap Plug - Black
- Search Results: 8~201
- Search Results: 8~201~5uc3~ez
- Search Results: 23~105
- Shop: #42 Spindle for 5,200-lb to 7,000-lb Trailer Axles - 2-1/4" Diameter
- Shop: Dexter Trailer Hub and Drum Assembly - 6,000 lb E-Z Lube Axles - 12" - 6 on 5-1/2
- Q&A: Choosing Between Dexter Axle and Axle-Tech Replacement Brakes for a 2009 Palomino Pony Pop-Up
- Q&A: Can a Hub with Outer Bearing 15123 and LM67048 Both Fit Same Spindle
- Q&A: Trailer Hub Recommendation with Number 8-201
- Video: etrailer Easy Grease Hub And Drum Assembly Installation
- Search Results: 023 358 00
- Search Results: 8~201~51uc3~ez
- Search Results: dexter drums