How to Pick Out Correct Bearing Buddy for Trailer Hub
Question:
Would like to purchase bearing buddies for our 2016 forest river Salem cruize lite. Not sure which one to get since theres 4 or 5 to chose from. Which one do you recommend.
asked by: Dale L
Expert Reply:
In order to pick out the correct bearing buddy you will need know the pilot hole of your hub. To do this, remove the wheel and tire and remove the grease cap from the center of the hub. Usually it is a metal cap that is just lightly hammered into place. Use a screwdriver to pry off the cap.
Clean the grease off and measure the opening. I have included a video demonstrating the Bearing Buddy.
The Bearing Buddies # BB1980A-SS that you referenced are for hubs with a 1.98 inch hub bore.
Product Page this Question was Asked From
Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 1.98 Inch
- Bearing Buddy
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Trailer Tire Sizing
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Q&A: Can etrailer 2,000 lb Axle be Flipped
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Q&A: What is the Best Grease for Trailer Bearings
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: Can I Use Different Grease w/ the CE Smith Trailer Idler Hub Assembly?
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: How To Tell What Size Bearing Buddy Is Needed for My Trailer Hubs
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: 7 Common Questions Everyone Has About Trailer Tires