Where Is The Draw-Tite Drawbar # 3593 Manufactured At
Question:
Where is this product made?
asked by: Todd
Expert Reply:
The Draw-Tite Drawbar # 3593 is made in Mexico per the manufacturer.
The ball mount has a sturdy steel construction with a solid shank. It has a black powder coat finish that covers an e-coat base which offers superior rust protection.
The 2 inch hitch ball # 19258 and the 1-7/8 inch hitch ball # 19256 will work with the shank above.
To lock the drawbar to your trailer hitch The etrailer Trailer Hitch Receiver Lock for 1-1/4" Hitches # e98879 will help prevent theft of the ball mount or hitch-mounted accessories. The pin has a sturdy steel construction and has a chrome plating that helps resist corrosion. The hitch pin lock is made in the USA.
The Curt Ball Mount # C45312 is made in The USA.
I attached a review video link below.
Products Referenced in This Question
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Curt Solid Ball Mount for 2" Hitches - 1" Rise, 2" Drop - 10" Long - 12K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1-1/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Rise - 1 Inch
- Fits 2 Inch Hitch
- 12000 lbs GTW
- Class IV
- CURT
more information >
etrailer Trailer Hitch Receiver Lock for 1-1/4" Hitches - Flush - 2-1/8" Span - Chrome
- Trailer Hitch Lock
- Standard Pin Lock
- Keyed Alike
- Chrome
- Fits 1-1/4 Inch Hitch
- Flush Pin
- 2-1/8 Inch Span
- etrailer
more information >
Product Page this Question was Asked From
Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 3 Inch
- Rise - 2 Inch
- Fits 1-1/4 Inch Hitch
- 2000 lbs GTW
- Class I
- Draw-Tite
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: How to Measure for Trailer Hitch Drop
- Article: Trailer Wiring Diagrams
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What Parts Are Needed For 7-Way And Curt Echo Wireless Trailer Brake Controller 2012 Subaru Outback?
- Article: Trailer Hitch Installation Tips
- Q&A: Does Trailer Hitch For 2024 Hyundai Venue Have Concealed Crosstube
- Q&A: What is the Difference Between Class 1 and Class 2 Hitches for the Scion XB
- Article: My Trailer Hitch Doesn't Fit
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Q&A: Trailer Hitch Receiver For 2023 Hyundai Elantra Hybrid
- Q&A: Recommended Hitch for a 2023 Kia Soul
- Q&A: Least Visible Hitch for a 2022 Chevy Spark