Correct Replacement Braking Assemblies for Dexter 2,200 Lb Axle On Coleman Pop-Up
Question:
I have a 1997 Coleman SunValley popup camper. It has 2200lb axle with trailer brakes. Do you carry a replacement 8 brake kit? In particular, the back plate assembly.
asked by: Verne J
0
Expert Reply:
I do have an option for you but I'm not aware of any electric brakes this size. For an axle this size, I'd expect a 7x1-1/4" assembly such as the Electric Trailer Brake Kit part # AKEBRK-2. Please note, the correct way to measure electric trailer brakes is on the inside of the hub where the shoes ride.
expert reply by:
Conner L
0
Product Page this Question was Asked From
etrailer Electric Trailer Brakes - 7" - Left/Right Hand Assemblies - 2,000 lbs
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Manual Adjust
- 7 x 1-1/4 Inch Drum
- 2000 lbs Axle
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- etrailer
more information >
Continue Researching
- Q&A: Replacement Trailer Grease Seals for Allis 5013 29772
- Q&A: Kit to Convert 2021 Vanleigh Pinecrest 335RLP to Electric Over Hydraulic Disc Brakes
- Q&A: How To Setup a 2019 Jeep Cherokee Trailhawk for Flat-Towing
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Q&A: Can Electric Trailer Brake Kit # AKEBRK-2 be Submerged in Water
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Replacement Fan Recommendation for the MaxxAir 4700K
- Article: Trailer Wiring Diagrams
- Q&A: Will the Draw-Tite Trailer Hitch Fit a 2022 Volvo XC90 Recharge
- Q&A: How to Pick Out Replacement Grease Seals for Hadco 3122
- Article: Most Popular Wheel Bearings
- Article: Trailer Tire Sizing
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch