Replacement Idler Hub For A 2,000 Pound Dexter Trailer Axle
Question:
What idler hub and bearing kit to I buy for a 2,000 lb. Standard Spring Dexter® Trailer Axle
asked by: Scott J
Expert Reply:
There are two different options of idler hubs that we have available for a 2,000 pound axle. You will have to first let us know what your bolt pattern is which I will link a link below to help you find out what your pattern is. Next we will need to know what your inner and outer bearing numbers are on your current hubs. I will link that below as well.
The two bolt patterns that we have are the 5 on 4-1/2 and the 4 on 4. The two options for outer bearings would be # L44643 and # L44649. There are two options on the inner bearing, # L44649 and # L68149.
The Dexter Trailer Idler Hub Assembly # 8-258-50BTUC1 has a 5 on 4-1/2 bolt pattern and the inner bearing is # L44643 and the outer bearing is # L44643.
When you find out your bolt pattern and your inner and outer bearing numbers please reach back out to me and I will get the correct one for you.
I attached a few links below.
Products Referenced in This Question
Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub
- Standard
- L44643
- L44643
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Replacement Trailer Hub Bearing - L44643
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.000 Inch I.D.
- Bearing L44643
- Race L44610
- 2000 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Trailer Axle with Idler Hubs - 4 on 4 Bolt Pattern - 60" Long - 2,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- Idler Hubs
- 2000 lbs
- 4 on 4 Inch
- 48 Inch Long
- 60 Inch Long
- No Drop or Lift
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Q&A: What Is The Speed Rating On The Kenda 5.30-12 Bias Trailer Tire # AM30710
- Q&A: Replacement Axle Recommendation for 49.5 Spring Center and 59.5 Hub Face Measurements
- Q&A: Availability of ST205/75R14 Trailer Tires In a Load Range E or F
- Q&A: Solution for Replacement Hubs on Northern Tool Ultra-Tow 49803 Aluminum Trailer
- Article: Trailer Tire Sizing
- Q&A: Solution for Replacement Hubs on Boat Trailer With L44649/LM11749 Bearings
- Q&A: Difference Between EZ Lube Compatible Hubs and Regular Hubs
- Q&A: Brackets to Mount CE Smith Trailer Fenders
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Routing the Power Wire for a Trailer Wiring Harness
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Accurately Measure Trailer Leaf Springs