Replacement Tarp for Extang Trifecta 2.0 Soft Tonneau Cover on a 2007 Ram 2500 Short Bed

Question

Question:

Will item#92450-20 fit trifecta 2.0 on 2007 ram 2500 6.4 bed ?

asked by: John A

0

Expert Reply:

The correct replacement tarp for the Extang Trifecta 2.0 Soft Tonneau Cover # EX92770 on your short bed 2007 Ram 2500 is found as part # EX92770-20 on our site.

The part # EX92450-20 you were looking at is for various 2014-2019 GM short bed pickups.

expert reply by: Jon G

0

Answer 1

The Replacement Tarp for Extang Trifecta 2.0 Soft Tonneau Cover EX92635-20 will install following the installation instructions of the #EX92635 you see attached. This is only a fit for the 1994 - 2010 Mazda B Series Pickup 7 Foot Bed and the 1983 -…

view full answer...

Answer 2

We have the replacement part for the 6-1/2 foot Extang Trifecta 2.0 #EX92770 on a 2004 Dodge Ram Pickup #EX92770-20.

view full answer...

Answer 3

It will be difficult to match up a replacement tarp for the Extang Trifecta tonneau cover on your 2015 Silverado 1500 6-1/4' bed without a serial number. If you have Extang Trifecta Signature 2.0 Soft Tonneau Cover - Folding CANVAS #EX94450…

view full answer...

Answer 4

The Access Toolbox Edition Tonneau Cover, part #834532002443 is specifically designed to be used with a cross-over style truck bed toolbox that is 20 or 21 inches wide (measured from front to back.) As long as your toolbox is of compatible width,…

view full answer...

Answer 5

We have exactly what you need for your 2008 Dodge Ram with a 6-1/2 foot bed, the Replacement Extang Classic Platinum Tonneau Cover #EX6770. This is designed to be a replacement for Extang Classic Platinum Tonneau Covers on a 2002 - 2008 Dodge Ram…

view full answer...

Answer 6

I reached out to my contact at Extang and the correct cover is the Replacement Tarp for Extang Classic Platinum Tonneau Cover-Black #EX6770 for your 2007 Ram 1500 Short Bed.

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 9

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 10

While we may have an option for you, we do not have the exact specs on your Allis grease seal part number 5013 29772. However, with the 1.6" ID and 2.5" OD measurements you provides, that is very close to our #58846. This particular grease…

view full answer...

Answer 11

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 12

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Replacement Tarp for Extang Trifecta 2.0 Soft Tonneau Cover on a 2007 Ram 2500 Short Bed

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching