Solution for Replacement Hub on Old Trailer with 3/4" Spindle Diameter
Question:
I have an old trailer with hub and rim made together Would like to replace with hub/bolt on rim with 4x4 center The spindle is straight 3/4 Any suggestions
asked by: Roger
Expert Reply:
For a 3/4" spindle diameter you'll need a hub that uses the # LM11949 bearing but unfortunately we don't carry any that use that bearing so for your application I recommend replacing your axle to something more common so it's easier to find standard parts that require maintenance, like you're seeing with the hubs and bearings.
If you can let me know your hub face and spring center measurements (see attached) I can see if we have any standard axles that work as a replacement, otherwise I recommend checking out the Timbren Axle-Less Trailer Suspension System with Hubs - 4 on 4 - Regular Tires - 2,000 lbs # A20RS440.
I like the Timbren kits because they have the suspension integrated into them and they work independently for better performance and ride quality. Attached is an installation video for you to check out.
Products Referenced in This Question
Timbren Axle-Less Trailer Suspension w/ Idler Hubs - Standard Duty - No Drop - 4 on 4 - 2,000 lbs
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- Idler Hubs
- 2000 lbs
- 4 on 4 Inch
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - LM11949
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- .750 Inch I.D.
- Bearing LM11949
- Race LM11910
- 3000 lbs Axle
- etrailer
more information >
Continue Researching
- Q&A: Finding Replacement Wheel Bearings for Log Splitter With a 3/4 Inch Diameter Spindle
- Article: Most Popular Wheel Bearings
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Option For Karavan Trailer Winch Stand
- Q&A: Troubleshooting Bulldog Electric Landing Gear that Turns But Does Not Raise or Lower Jack
- Q&A: How to Tell if a Bulldog 10K/12K Jack is a Single Speed or 2-Speed
- Q&A: Availability of Side Crank Trailer Jack with Removable Handle
- Q&A: Troubleshooting Bulldog Powered A-Frame Jack that Does Not Want to Function
- Q&A: Is There Differnce Between Trailer Grease Seals 10-36 and GS-2250DL
- Article: Trailer Tire Sizing
- Article: Flat Towing Package for 2015-2018 Chevrolet Silverado/GMC Sierra 3500
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: Gooseneck to 5th Wheel Adapters
- Article: Rust Prevention