Would the Titan Disc Brake Kit # T4843300 Fit on a 2013 EZ Loader Boat Trailer
Question:
I have a 2013 EZloader boat trailer with oil bath hub. Does the T4843300 have all the parts necessary to replace the oil bath with a grease system and is it an EZ lube system?
asked by: Jay E
Expert Reply:
Before you order anything as a replacement hub and rotor for you trailer we need to find out what spindles are on your 2013 EZ Loader boat trailer. One way to do this is to remove the current hubs and get the bearing numbers from both bearings. Or you can use a dial caliper or micrometer to get exact measurements of your spindles. Check out the picture I attached to see what measurements are needed.
The B,C and D dimensions are the most important.
The Titan Disc brake kit # T4843300 that you referenced has inner bearings # L68149 and outer bearings # L44649 which means this is designed to be used on a # 84 spindle. The B,C and D dimensions of this spindle are 1.73, 1.38 and 1.06 respectively. If you determine that your spindle is the # 84 spindle then this kit should work for you.
Also, this kit comes with a bearing buddy type lubrication system to make greasing the hubs easier. Other than that this comes with everything you would need to use this grease hub based system on your trailer.