How Does Grease Reach The Bearings On The CE Smith Trailer Axle Beam # CE33201GA?
Question:
Does the grease reach the back bearings when using grease gun or is hub removal necessary for greasing? I didnt see a hole near the base of the spindle, only near the end.
asked by: Tom F
0
Expert Reply:
Yes, the grease will reach the inner bearing through a hole on the spindle on the CE Smith Trailer Axle Beam # CE33201GA. I have included an image below that shows the hole in the spindle.
expert reply by:
Bud M
0
EZ Lube Grease Hole on CE Smith Trailer Axle Beam # CE33201GA
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
CE Smith Trailer Axle Beam with Standard Spindles - Galvanized - 57-1/2" Long - 1.8K
- Trailer Axles
- Leaf Spring Suspension
- Standard Spindles
- No Hubs
- 1800 lbs
- Spindles Only
- 46-1/2 Inch Long
- 57-1/2 Inch Long
- No Drop or Lift
- CE Smith
more information >
Continue Researching
- Video: Review of Americana Trailer Tires and Wheels - Tire with wheel - AM98NR
- Shop: CE Smith Single Axle Trailer Fender - Pre-Galvanized Steel - 8" Wheels - Qty 1
- Shop: CE Smith Trailer Axle Beam with Standard Spindles - Galvanized - 57-1/2" Long - 1.8K
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-440-2-G-1K Review
- Shop: Trailer Axle with Idler Hubs - 4 on 4 Bolt Pattern - 60" Long - 2,000 lbs
- Shop: Trailer Idler Axle Beam with Easy Grease Spindles - 60" Long - 2,200 lbs
- Search Results: tongue extension
- Shop: Trailer Idler Axle Beam with Easy Grease Spindles - 60" Long - 2,000 lbs
- Shop: CE Smith Trailer Axle w/ Idler Hubs - 5 on 4-1/2 - 57-1/2" Long - 1.8K
- Video: CE Smith Trailer Fenders - No Step - CE17700G Review
- Search Results: 185 x 85 x 8 trailer tire
- Shop: Vehicle Cargo Control
- Shop: Truck Bed Mat
- Shop: Tongue Extension Kit for Yakima Rack and Roll Trailer
- Search Results: axle
- Search Results: safety chains
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Search Results: akihub~440~2~g~1k
- Q&A: Can 3,500 lb Axle of Trailer Be Upgraded to 5,200 lb Axle
- Q&A: Measuring Harbor Freight Trailer Spindle to Determine if there are Replacement Hubs or Bearings
- Q&A: Replacement Hubs for Harbor Freight Haulmaster # 90154 Trailer
- Video: Review of CE Smith Trailer Axles - Leaf Spring Suspension - CE33201GA-HUB
- Video: Review of CE Smith Trailer Axles - Leaf Spring Suspension - Square Trailer Axle - CE33201GA
- Video: TruRyde Electric Brake Assembly Installation
- Video: Optronics Flexible LED Light Strip Review
- Q&A: Available Galvanized Axles For Boat Trailer
- Q&A: Replacement Axle for Harbor Freight Trailer 4x8 Foot 1195 lb Capacity
- Search Results: 1500 lb axle
- Search Results: ce33201ga~hub