Can Hub Be Replaced on Old Cement Mixer
Question:
Have an old cement mixer with a 1.37 straight axle. Need a trailer idler hub. Bolt pattern does not matter as I will need to get a wheel and tire to fit what ever hub will work on this axle. Seems the Replacement Trailer Hub Bearing - L68149 is a perfect fit but would need this bearing inside and out. Hoping you may have a solution. Thank you
asked by: John K
Helpful Expert Reply:
I have a solution for you but it looks like there aren't any hubs that use the L68149 bearing for the inner and outer positions. Because of this you'll want to use a different axle system so you can find parts that work but also update your cement mixer to more modern parts so it will be easier to maintain the axles in the future.
We have some standard axles but what you may find easier to use and install is the Timbren Axle-Less Trailer Suspension System with Hubs # A20RS545. This is a bit easier to setup since you won't be dealing with hangers and leaf springs - the Axle-Less system uses AEON springs that are connected to the mounting brackets so it's a much simpler system.
Attached is a link to an installation video of this system as well as a link to our selection of replacement axles for you to check out.
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension w/ Idler Hubs - Standard Duty - No Drop - 5 on 4-1/2 - 2K
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- Idler Hubs
- 2000 lbs
- 5 on 4-1/2 Inch
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Timbren Axle-Less Trailer Suspension w/ Idler Hubs - Standard Duty - No Drop - 5 on 4-1/2 - 2K
- Article: Trailer Tire Sizing
- Article: Most Popular Wheel Bearings
- Q&A: Ladder Rack Compatible With Pace Edwards Ultragroove Tonneau on 2023 Ford F-150 With 6-1/2 Foot Bed
- Article: Where to Position the Trailer Axle?
- Article: Trailer Wiring Diagrams
- Q&A: Replacement for Al-Ko B850-3 Trailer Axle Needed
- Q&A: What is the Difference Between Regular and Off Road Trailer Tires for Timbren Axleless Suspension
- Q&A: Recommended 5 Lug Timbren Axle-Less System for 13" Trailer Tires
- Q&A: Timbren Axle Less Kit with 5 Lug Bolt Pattern that Can be Used with 15 inch Wheel
- Q&A: Dimensional Drawing for Dutton-Lanison Rigid Marine Jack
- Q&A: Largest Recommended Wheel and Tire For Use With Timbren Axle-Less Trailer Suspension # A20RS545
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Brake Controller Installation: Starting from Scratch