How to Determine Which Bearing Buddy Set Will Fit a Boat Trailer
Question:
How do I Determine the correct size if buddy bearing to order for my boat trailer?
asked by: Mark R
Expert Reply:
There are 2 ways to determine what size Bearing Buddy you will need for a given trailer hub. First and most accurate is to get the outer bearing number off of the bearing. You can do this without removing the hub. You just need to be able to see the outside of the outer bearing. Wipe away the grease to see the number stamped into the side. With that number I can determine if there is an option available.
The other way is to measure the hub center hole using a set of dial or digital calipers. The measurement has to be as accurate as possible so using calipers is required. With the measurement I can determine if there is a Bearing Buddy set that will fit.
Product Page this Question was Asked From
Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 1.98 Inch
- Bearing Buddy
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Trailer Tire Sizing
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Q&A: Can etrailer 2,000 lb Axle be Flipped
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Q&A: What is the Best Grease for Trailer Bearings
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: Can I Use Different Grease w/ the CE Smith Trailer Idler Hub Assembly?
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: How To Tell What Size Bearing Buddy Is Needed for My Trailer Hubs
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: 7 Common Questions Everyone Has About Trailer Tires