Jack Placement on Tandem-Axle Trailer Changing Flat Tire
Question:
Equalizer Can I lift using jack under? Had a flat on highway and thats how I changed tire, 1 carry a small floor jack
asked by: Jon V
0
Expert Reply:
If you are asking can you place the jack directly under the equalizer of the Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs, # AP216-H238, I recommend against doing so. I suggest for purpose of lifting the trailer for wheel removal, you go directly to the axle for jack placement or at a designated lift location on the trailer identified by the OEM.
expert reply by:
Michael R
0
Product Page this Question was Asked From
Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 13-1/8" Long Equalizers
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Slipper Springs - 2 Inch
- Tandem Axle
- Dexter
more information >
Continue Researching
- Article: Slipper Spring Trailer Suspension System Review
- Q&A: How to Determine Hanger Spacing on a Tandem-Axle Trailer Hanger Kit for Slipper Springs
- Q&A: Slipper Spring Hanger Positioning for 7,000 lb Tandem Axle
- Q&A: What Are Brake Lines Made of in Kodiak Hydraulic Brake Line Kit
- Article: Double-Eye Trailer Suspension System Review
- Q&A: Hanger Kit and Slipper Spring Spacing for Tandem 7,000 lb Axles to Add 16 Inch Wheels
- Q&A: Hanger Spacing for Tandem-Axle Trailer Hanger Kit AP216-H238 and 29-1/2 Inch Slipper Springs
- Q&A: Installation if EcoHitch 306-X7196 on 2008 Toyota Prius
- Q&A: Hanger, U-Bolt, and Slipper Spring Kit for 8k Trailer Axles
- Article: Where to Position the Trailer Axle?
- Article: How to Raise Your Travel Trailer Height
- Article: How to Choose a Battery Charger
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: How to Accurately Measure Trailer Leaf Springs