Tow Wiring Connector Plug For 2013 Honda Pilot EX-L

Question:

I have a Honda Pilot and need wiring with both 7 way and 4 flat plug. Do you have a kit that has this in it so I dont have to do any splicing? Thanks

asked by: Kimberly S

Expert Reply:

When it comes to having a 7 way plug and a 4 flat plug on your 2013 Honda Pilot without splicing wires we have a bunch of adapters they can plug into the 7 way to make it a 4 flat

We have The T-One Vehicle Wiring Harness for Factory Tow Package - 7-Way Trailer Connector # 118265 which has just the 7 way plug that plugs into the vehicle's factory tow package wiring harness which is located behind the rear bumper, this harness comes out as a 7 way plug. You can make the 7 Way into a 4 flat using The 7-Way RV to 4-Way Flat Trailer Connector Adapter # HM47365. Using this will adapt your 7 round into a 4 flat.

Then we have The T-One Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector # 118558 which has the 4-flat plug that plugs is also located behind the rear bumper.

If you want both of them you will have will have to splice into your wiring using The Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires # ETBC7. This will give you both the 4 flat and the 7 round plugs, but you will have to spice in the white ground wire the blue brake control wiring and the black battery wire.

I attached a review video link below.