Recommended Hub And Drum Kit For A 2008 Fleetwood Prowler Travel Trailer
Question:
Will these hubs fit 23-468-469?
asked by: Alan G
Expert Reply:
When it comes to replacing the hub and drums on your 2008 Fleetwood Prowler Travel Trailer first you need to know what the inner and outer bearing numbers are on your existing hub and drum. I will put a link below showing how to find the inner and outer bearing numbers.
The Dexter Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles - 10 inch Diameter - 5 on 4-1/2 # 84546UC3 has an inner bearing # L68149 and an outer bearing # L44649.
The inner bearing # L68149 has an inner diameter of 1.378 inches and the outer bearing # L44649 has an inner diameter of 1.063 inches. This system has a bolt pattern of 5 on 4-1/2 inches and has a wheel bolt diameter of 1/2 inch, and will work with the 23-368-469. You will just need to make sure the inner and outer bearing numbers match.
I attached a review video link below.
Products Referenced in This Question
Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Wiring Diagrams
- Article: Most Popular Wheel Bearings
- Q&A: Replacement Hub and Brake Assembly for AL-KO 8490
- Q&A: Replacement Hub for a Lippert LCI 126003 Hub
- Q&A: Replacement Hub & Drum For UFP HD-1377-10 & Hydraulic Brakes For Boat Trailer
- Q&A: Correct Replacement for AL-KO 7230 Hub/Drum and Brakes
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: Replacement Hub and Brake Assemblies that Fit Sure Trac 3,500 lb Axle
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Are New Brake Drums Required if Replacing Electric Brake Assemblies on a Trailer
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement