B&W Turnover Ball Installation Kit For a 1994 Ford F-250

Question

Question:

Will this rail kit fit this truck? 1994 Ford F250 2wd 8ft bed 7.3 diesel We already have the hitch plate and would like to install into this truck. We bought the set-up used and the rail kit that came with the hitch is for a newer Ford and will not fit this truck. We were wondering if PT# BWGNRM1111 would fit this truck.

asked by: Paul C

1

Helpful Expert Reply:

Your 1994 Ford F-250 2WD 8' bed with the 7.3 diesel will need one of two installation kits depending on if it has overload springs.

The B&W Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRK1110 is for your truck if it has the factory overload springs. This kit will use the Installation Kit # BWGNRM1110 and Center Section # BWGNRC800.

The B&W Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRK1100 is for your truck if it does not have the factory overload springs. This kit will use the Installation Kit # BWGNRM1100 and Center Section # BWGNRC800.

The Install Kit # BWGNRM1111 you found is for a 2011-2016 Ford F-250, F-350 and F-450.

expert reply by: Bud M

1

Answer 1

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 2

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 3

I can understand that if your boat is loaded on the trailer, you don't want to remove one of the wheels to measure the fenders. Measuring a fender with the tire still mounted can be tricky, but it's not impossible. I've provided a diagram…

view full answer...

Answer 4

If the lift on your 2016 Ford F-250 is a suspension lift you almost definitely are going to need spacers. If it's a body lift you won't. With that being said a 4 inch suspension lift doesn't always mean you need a 4 inch spacer. You need…

view full answer...

Answer 5

The B and W bracket kit part #BWGNRM1057 is the correct bracket kit for your 2008 Chevy Silverado 1500 as it is what comes with the part #BWGNRK1057 which is the brackets and the hitch center section. If you already had the part #BWGNRC959 then all…

view full answer...

Answer 6

B and W does make a gooseneck hitch that was designed for universal flatbed applications like yours but it does not look quite like what you have. It's the part #BWGNRK1500 which would work in place of what you have but it does not look like you…

view full answer...

Answer 7

I checked with B and W and the correct replacement ball release latch pin handle you are looking for is the part #BW1900-2-2007 that you referenced for your B and W Turnoverball hitch #BWGNRK1111.

view full answer...

Answer 8

Yes, we do offer the B and W Turnoverball Gooseneck Install kit part #BWGNRM1111 that you are looking for. With that said the correct rail kit for a 2005 Ford F-250 short bed is the part #BWGNRM1108 so that would be the kit you'd want.

view full answer...

B&W Turnover Ball Installation Kit For a 1994 Ford F-250

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching