Front and Rear Torklift Camper Tie Downs for 2011 Ford F-350 OEM Steps and Hitch Long Bed

Question

Question:

Does TorkLift make a frame mounted truck tie down system for a 2011 Ford F350 8ft bed with factory hitch and factory step? I only see for 6 3/4 bed.

asked by: Kevin F

0

Expert Reply:

Yes we do have the correct Torklift frame mounted tie downs that fit your 2011 Ford F-350 long bed with the factory hitch and factory steps. For that you'd want the part # TLF2016 for the front and part # TLF3006 for the rear and you'd be set.

expert reply by: Jameson C

0

Answer 1

The primary advantage of frame-mounted camper tie-downs like the TorkLift #TLF2012A and #TLF3001A, which are designed to fit your Ford F-350 if it has the 6-3/4 foot bed without a step/board underneath and a factory hitch, is the stability they…

view full answer...

Answer 2

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 3

The TorkLift Talon Custom Frame-Mounted Camper Tie-Downs #TLF3001A was designed for Fords up to 2004. It has different bends to compensate for components under the truck. It will work in place of the TorkLift Custom Frame mounted Camper Tie-Downs…

view full answer...

Answer 4

Weight distribution works to distribute the tongue weight of a trailer up to the front axle of the tow vehicle so that it will sit more level and handle/brake better. That being said the systems do not "reduce" tongue weight or allow you to…

view full answer...

Answer 5

The Equal-i-zer Weight Distribution System #EQ37120ET that you referenced does come with a 2-5/16 inch hitch ball.

view full answer...

Answer 6

The only hitch extension we offer that is compatible with weight distribution hitches is the Titan Hitch Box Extension and Reducer #RP45292. This product is designed to fit hitches with a 2-1/2 inch receiver opening and then reduces down to a 2 inch…

view full answer...

Answer 7

I am happy to report that the TorkLift StableLoad Suspension Upgrade #TLA7200 does not require drilling on your 2022 Ford F-250 super duty. I went ahead and attached a photo of from the instructional manual for you to check out. It is important to…

view full answer...

Answer 8

The correct rear sway bar for your 2013 Ford F-350 SRW 4x4 is the Roadmaster part #RM-1139-173-00 that you referenced. This was designed for trucks like yours that do not have the factory sway bar and will do a great job improving the handling and…

view full answer...

Answer 9

I went ahead and reached out to Torklift, and they confirmed what you need to in order to remove the gas tank cover on your vehicle to install the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front #TLF2016. The cover drops down and gives you…

view full answer...

Answer 10

In order to add a set of front and rear frame mounted camper tie downs to your 2016 Ford F-250, I would need to know the bed size, running board/bed step option, and trailer hitch type. For the front of your truck you will want to use the TorkLift…

view full answer...

Front and Rear Torklift Camper Tie Downs for 2011 Ford F-350 OEM Steps and Hitch Long Bed

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching