Fit of Kuat Beta # B202-2 Bike Rack on 2007 Toyota FJ Cruiser

Question:

I have a 2007 Toyota FJ Cruiser and wanted to be certain that when the rack is attached, there is enough clearance due to the spare tire being mounted on the rear door of the vehicle...

asked by: Donnie B

Expert Reply:

When we installed a Hidden Hitch # 87412 or a Draw-Tite # 75461 on a Toyota FJ Cruiser, we discovered that the hitch pin hole to furthest rearward point of spare tire dimension is 9 inches, which means that the bike rack used would need to a have hitch pin hole to closest portion of the rack dimension greater than 9 inches. In this instance, the Kuat Beta would not fit.

You will need to measure the clearance needed, as outlined in the FAQ article I have linked you to. The FAQ also lists several bike racks and their shank lengths. The Swagman Trailhead 2-bike model for instance, part # S63360 offers about 11 inches of clearance that would work very well for you.

To carry womens bikes or bikes with sharply angled top tubes or step-through frames, using a frame adapter like part # 64005 is recommended. The adapter spans the distance between the seat post and the handle bar gooseneck, and provides a level attachment point to the bike rack so the bike has greater ground clearance and is not carried at an angle.

expert reply by: Mike L