Parts Need to Flat Tow a 1976 Toyota FJ-40 Behind a Motor Home
Question:
Looking to determine what i need or what would be compatible to install a towbar on the front of my 1976 Totota Landcruiser with a stock bumber. Is there a mounting bracket that i need to mount to the frame rails which run the length of the vehicle? There is not a solid steel/sturdy bumper across the front, just a tinnner metal bumper
asked by: John
Helpful Expert Reply:
What you are going to need is a set of Blue Ox base plates # BX88230. You can bolt these to the bumper but the bumper will need to be reinforced and will have to also attach to the frame if it does not already. I have included a link to the installation instructions for you.
You can then add a Blue Ox tow bar. I recommend the Alpha, # BX7380. This tow bar also comes with safety cables and it is a motor home mount tow bar which is considered the better and more secure option that coupler style tow bars.
Next you will need a lighting solution. The easiest to use and set up is a magnetic kit, # RM-2120. With this kit you will not need to cut into the vehicle wiring for it to work.
Finally most states now require a supplemental braking system on the vehicle being flat towed. I recommend the Blue Ox Patriot, # BLU37TR. It is a proportional system that will apply the Toyota brakes in proportion to how much the tow vehicle is braking.
If possible, be sure to check the vehicle owners manual for any information on flat towing the vehicle. You may have to contact Toyota directly for this information given the age of the vehicle. I have also included some helpful links on flat towing for you.
Products Referenced in This Question
Blue Ox Patriot Portable Flat Tow Brake System - Proportional
- Tow Bar Braking Systems
- Brake Systems
- Proportional System
- Recurring Set-Up
- Portable System
- Power Assist Brake Compatible
- Air Brakes
- Air Over Hydraulic Brakes
- Hydraulic Brakes
- Blue Ox
more information >
Blue Ox Alpha 2 Non-Binding Tow Bar - RV Mount - 2" Hitch - 6,500 lbs
- Tow Bar
- Hitch Mount Style
- Telescoping
- Steel
- 6500 lbs
- Fits Blue Ox Base Plates
- Blue Ox
more information >
Blue Ox Universal Bolt-On Base Plate Brackets - 5,000 lbs
- Accessories and Parts
- Base Plates
- Brackets
- Blue Ox
more information >
Roadmaster Standard Magnetic Tow Lights
- Tow Bar Wiring
- Bypasses Vehicle Wiring
- Removable Tail Light Kit
- 20 Foot Long Harness
- Universal
- Magnetic Mount
- Roadmaster
more information >
Product Page this Question was Asked From
Roadmaster Tracker Tow Bar - Coupler Style for 2" Ball - 5,000 lbs
- Tow Bar
- Coupler Style
- Fixed
- Steel
- 5000 lbs
- Fits Roadmaster Base Plates - Crossbar
- Stores Separately
- Standard
- Roadmaster
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Roadmaster Vehicle Specific Base Plates
- Article: What Is a Supplemental Braking System?
- Article: Must-Have Flat Towing Components
- Q&A: Will Roadmaster XL Base Plate Kit # 278-1 Fit a 2006 Chrysler PT Cruiser
- Article: Trailer Wiring Diagrams
- Q&A: Choosing Between the Brake Buddy Select 3 and the Blue Ox Patriot Supplemental Braking System
- Q&A: Can I Tow a 2020 Honda Civic Sport Behind My Motorhome
- Article: Flat Towing Package for 2011 Chevrolet HHR
- Article: The Definitive, Step-by-Step Flat Towing Setup Guide
- Q&A: Wiring For Lights When Dinghy Towing 2015 Kia Soul
- Q&A: Needed Equipment to Flat Tow a 2001 PT Cruiser Behind Motor Home
- Article: Flat Towing Package for 2010-2011 Jeep Liberty
- Q&A: Will RoadMaster XL Base Plate Kit Part # 278-1 Fit my 2009 Chrysler PT Cruiser
- Q&A: Complete Flat Towing Setup for a 2024 Ford Maverick