Roller Shaft For Mounting Yates Spool Roller YR510Y-4
Question:
I got a pair of 5” Yates rollers from you recently. I’ve realized that I’m going to need a pair of 1/2” bolts to mount them with. Shoulder bolts would be ideal. Do you have 5 1/2” shoulder bolts? I also would like to raise one of the rollers an inch and a half. Do you have something close to 1 1/2 by 1 1/2”, 5 3/4” or longer in length that I can use as a spacer beneath the roller bracket? Do you have fat 1/2” washers that I can use to take up the excess space in the bracket? 1/4” thick would be ideal. I can just pack in ordinary 1/2” washers if necessary. The assemblies would be better looking with thicker washers, but they wouldn’t work any better.
asked by: Ken R
Expert Reply:
We don't have shoulder bolts, but we do have the correct shaft for mounting the Yates Spool Roller for Boat Trailers - TPR - 5" Long - 1/2" Shaft # YR510Y-4.
What you will need is the Roller Shaft with Pal Nuts for Boat Trailer Rollers - Zinc-Plated Steel - 6-1/4" x 1/2" # CE10701A.
We do not have the washers or something for a spacer that can be used beneath the roller bracket.
![Kyle S](https://images.etrailer.com/static/images/catg/people/1237_tn.jpg)
Products Referenced in This Question
Roller Shaft with Pal Nuts for Boat Trailer Rollers - Zinc-Plated Steel - 6-1/4" x 1/2"
- Boat Trailer Parts
- Rollers
- Roller Shafts
- 1/2 Inch Diameter
- Zinc-Plated Steel
- 6-1/4 Inch Long
- CE Smith
more information >
Product Page this Question was Asked From
Yates Spool Roller for Boat Trailers - TPR - 5" Long - 1/2" Shaft
- Boat Trailer Parts
- Rollers
- Spool Roller
- 3 Inch Diameter
- Thermoplastic - Non-Marking
- 5 Inch Long
- Fits 1/2 Inch Shaft
- Yates Rubber
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: What Is Needed To Replace An Old Axle With A New Axle
- Article: Brake Controller Installation: Starting from Scratch
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Q&A: Correct Replacement for Fulton Winch Model 228
- Q&A: How To Install the Spindle Nut on a 12,000 Pound Dexter Axle
- Q&A: Dimensions of YR510Y-4 Yates Boat Trailer Spool Roller
- Q&A: What is Normal Temperature Rating for Trailer Hubs
- Q&A: How to Adapt a 7-Way Round Connector to a 7-Way Flat
- Q&A: Converting From 7-Way Round to 7-Way Flat Connector
- Article: How to Install E-Track in 3 Easy Steps
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Article: Trailer Wiring Diagrams
- Article: What is Boondocking