Availability of Hydraulic Trailer Brake Kit Without Mounting Studs
Question:
I need to replace the 10-inch hydraulic backing plates for my boat trailer. The ones on your webpage all have mounting studs. Do you have one w/o the mounting studs?
asked by: Marty
1
Helpful Expert Reply:
For replacement hydraulic brakes you can still use the Hydraulic Trailer Brake Kit - Uni-Servo - Free Backing - 10" - Left/Right Hand - 3,500 lbs # AKFBBRK-35 you were looking at. Although this does come with mounting hardware, you can simply remove the mounting studs. They are not permanently attached to the brakes.
expert reply by:
Robin H
1
Product Page this Question was Asked From
Hydraulic Trailer Brake Kit - Uni-Servo - Free Backing - 10" - Left/Right Hand - 3,500 lbs
- Trailer Brakes
- Hydraulic Drum Brakes
- Standard Grade
- Free Backing
- Manual Adjust
- Single Servo
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Article: Trailer Tire Sizing
- Shop: Hydraulic Trailer Brake Kit - Uni-Servo - Free Backing - 10" - Left/Right Hand - 3,500 lbs
- Shop: Mounting Hardware for 10" Brake Assemblies
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: Karrier ST175/80R13 Radial Trailer Tire with 13" Galvanized Wheel - 5 on 4-1/2 - Load Range D
- Video: etrailer Trailer Brakes - Hydraulic Drum Brakes - AKUBRK-35 Review
- Search Results: cotter pin
- Search Results: buddy hubs
- Search Results: drum assembly
- Video: Bearing Buddy Trailer Bearings Races Seals Caps BB17B Review
- Q&A: Available Sizes of Bearing Buddy Grease Cap Bras
- Search Results: bearing buddy bra 17b
- Shop: Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: Hydraulic Trailer Brake Kit - Uni-Servo - 10" - Left and Right Hand Assemblies - 3,500 lbs
- Video: etrailer Trailer Brakes - Hydraulic Drum Brakes - AKFBBRK-35-D Review
- Shop: Mounting Bolts and Hardware for 10" Brake Assemblies
- Article: Measuring a Trailer Tire
- Search Results: flexible hydraulic brake lines
- Video: Bleeding Brakes Demonstration
- Video: Dexter Axle Trailer Hubs and Drums - Hub with Integrated Drum - 84546UC3 Review
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Search Results: hub assembly
- Search Results: akfbbrk~35
- Q&A: Can Hydraulic Drum Brake Assemblies be Replaced with Free-Backing Plates
- Q&A: Does Switching from Idler Hubs to Hub and Drum Assemblies Move the Tires Out or In
- Q&A: Recommended Bearing Buddy Bearing Protectors For Dexter 3,500 Lb Trailer Hub Assembly
- Q&A: Can a Trailer Grease Seal Be Pressed In Too Far Beyond Flush
- Q&A: What Causes Grease On the Inside of Boat Trailer Wheels
- Q&A: Correct Replacement for Tru-Ryde Hub/Drum RVD-H-545
- Article: How to Bleed Your Trailer Surge Brakes