Installation of the Reese Weight Distribution Kit, Item # RP65509
Question:
Will this fit a 2008 Fleetwood bayside A frame trailer with 2 propane bottles and a battery?
asked by: Bill W
0
Expert Reply:
You will need to measure the trailer frame to see if the mounting location (see instructions) for the Reese Weight Distribution Kit, item # RP65509, will work. The center of your ball coupler to the attachment point on the trailer should be approximately, 27 to 30 inches. You can adjust this slightly to make the system fit with the propane bottles and battery holder on your trailer but the recommendation is that the chains be as perpendicular to the trailer frame as is possible.
expert reply by:
Robert G
0